B
bm02tj
- Posts
- 971
- Reaction score
- 2,856
Latest activity Postings About
-
-
Bbm02tj replied to the thread Pilot bearing install question.You want to seal the grease in so seal out
-
Bbm02tj replied to the thread Need a wrench for the wife.A folding star wrench would be better than the factory lug wrench
-
Bbm02tj replied to the thread Wiring aftermarket DRL lighting so that they turn on during the day but off at night…..Some have the DRL come on with motion with putting into gear and some when park brake is released I prefer DRLs not to come on till...
-
BWell we tried to point you in a better direction,but if you're hung up on the OEM pan,go for it,it's your truck and money.What fluid are...
-
Bbm02tj replied to the thread Wiring aftermarket DRL lighting so that they turn on during the day but off at night…..It sounds he want the DRL the moment he starts truck then off with lights Pick up switch signal from HVAC output to switch relay for...
-
Bbm02tj reacted to corneileous's post in the thread Wiring aftermarket DRL lighting so that they turn on during the day but off at night…. with
Like.
So then I'm assuming this is what I need correct? And hopefully this is the same thing? My local Oreileys has one. So if thats what I... -
Bbm02tj replied to the thread Grease Driveshaft - How far should I push it?.If you are talking the double cardigan centering unit it does not take a lot of grease
-
Bbm02tj replied to the thread Spider Gear Assistance Needed.I second that
-
B2 words "Tru Trac"
-
Bbm02tj replied to the thread Battery gauge dipping when ac compressor engages.How much is the RPM dropping
-
Bbm02tj replied to the thread replaced lower ball joints with moog question on greasing.Yes that is also what you grease centering ball in front drive shaft if you have a 4x4
-
-
Loading…
-
Loading…
