troutspinner
Senior Member
- Joined
- Sep 9, 2014
- Posts
- 1,256
- Reaction score
- 435
- Location
- Gilbertsville, Pa
- Ram Year
- 2019 Big Horn Crew Cab
- Engine
- 5.7 Hemi
Time for an upgrade, a truck upgrade that is. I removed these from my 2014 Ram, they are roughly 3 years old and sound amazing!
They are mounted in a standard Ram Sail panel using the nice screws that you can purchase from Madison Sound when you buy the tweeters.
There is one caveat to them, take a close look at the blown up picture of the one tweeter surround. You will see there is a blemish on the housing right above the left side screw. It is extremely small. I never noticed it until I removed them the other day. Most likely because that side faced away from me? When I say small, I mean really small, less than a pin head, I simply tapped the blemish with a marker and it made it disappear. I am a perfectionist and if you know what these tweeters are, you probably are too and there is no way I want someone to receive these and not know about this.
You will see in the rear that I soldered wires to the terminals and heat shrunk them. The terminals on these tweeters are known to be delicate and if you do not have soldering experience, I would recommend you use the leads I've already created.
They come with the original box as well. $150 shipped in the contiguous US. I will send them bubble wrapped and insured. Paypal for payment.
They are mounted in a standard Ram Sail panel using the nice screws that you can purchase from Madison Sound when you buy the tweeters.
There is one caveat to them, take a close look at the blown up picture of the one tweeter surround. You will see there is a blemish on the housing right above the left side screw. It is extremely small. I never noticed it until I removed them the other day. Most likely because that side faced away from me? When I say small, I mean really small, less than a pin head, I simply tapped the blemish with a marker and it made it disappear. I am a perfectionist and if you know what these tweeters are, you probably are too and there is no way I want someone to receive these and not know about this.
You will see in the rear that I soldered wires to the terminals and heat shrunk them. The terminals on these tweeters are known to be delicate and if you do not have soldering experience, I would recommend you use the leads I've already created.
They come with the original box as well. $150 shipped in the contiguous US. I will send them bubble wrapped and insured. Paypal for payment.