Interior Mods, Post em up!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jackaz

Junior Member
Joined
Jan 9, 2019
Posts
27
Reaction score
18
Location
Ohio
Ram Year
2016
Engine
3.6

rcarbaugh

Member
Joined
Sep 2, 2015
Posts
53
Reaction score
12
Location
Conway SC
Ram Year
2014 2500
Engine
6.7 Cummins
On my 2018 2500 CTD: First was adding an overhead console with the homelink buttons and a rear window slider switch:

medium800.jpg


Then added a leather steering wheel with the stereo controls:
medium800.jpg


Then a Z-Automotive Security bypass module so I could program the truck with AlfaOBD:
medium800.jpg


Then upgraded to a UAQ stereo:
medium800.jpg


And last but not least, added the storage drawer since RAM didn't want to on trucks with floor shifters:
medium800.jpg

Where did you find the drawer at??
 

awpratt

Member
Joined
Jan 26, 2018
Posts
81
Reaction score
35
Location
wisconsin
Ram Year
2017
Engine
5.7
Replaced my 2017 Express seat skins with the katzskin leather Black with Gray inserts, added heated seat pads at the same time. Added steering wheel audio controls, still to come premium cluster, Laramie Black and Gray Door panels, Leather steering wheel. Possibly a center Console. Color matched tinted windows.
 

nwsewell

Senior Member
Joined
May 29, 2019
Posts
224
Reaction score
183
Location
US
Ram Year
2019 Classic
Engine
5.7 Hemi
So far:
Weathertech floor liners in front and back
Red under-seat lighting (plugged into rear 12v socket until I find a good way to hard wire)
Locking glove box latch
Firearm quickdraw setup (left-handed paddle holster attached to map pocket in center console)

Coming soon:
Red LED replacement map and dome lights (as soon as they arrive in the mail)
Red front seatbelts (as soon as i can find a reliable replacement)

c93ad41a6111b4bb169e1b288c083659.jpg
849bc13e062d9052da2848642a57f4a2.jpg
Driver side lights
623591c1cdc09c7bc32b288765478889.jpg
Passenger side lights
72f9760546d02ef4dddc4bc07e3a16ed.jpg
On/off switch/power supply for under seat lights
4700d32388625653be94b92189f12cee.jpg
Quickdraw setup for my Glock 17
c46a05fb9469fd323f2f3af8ec83aa6b.jpg
Locking glove box latch
64f888b72d43facf076120a0b42a7275.jpg
 
Last edited:

Austen

Senior Member
Joined
Jul 30, 2018
Posts
315
Reaction score
148
Location
Missouri
Ram Year
2017
Engine
6.7 Cummins
I added OEM front Parksense and installed the entire front system over a month ago working complete as if factory even with my 3.5" basic dash cluster. My truck came factory with rear Parksense and it is a 2017 Ram 2500 6.7 Tradesman. Everything works flawlessly but I just installed a gas 7" MY18 EVIC gauge cluster today and the front sensors will give the audible tone and it will show the rear sensors while approaching something in front of the vehicle but it does not show the front 'distance' lines for the front park sense. Only the rear. Again right before I swapped the cluster my factory MY17 3.5" EVIC would display both front and rear sensors distance lines. Before I enabled the front Parksense and only had rear Parksense I was able to choose if I wanted rear sensors displayed or just the tone and now that I have the front Parksense I cannot choose to display or not to display but with the 3.5 it always displayed both. Odd to me that just with the install of the premium evic it will not display front. Anyone have any ideas? 630bf1698d6024806db366bdff6a8c20.jpg02ba07f64e59dcec62fba08e1da7acaf.jpgf523e8799e8a2ab0739cfdae764a4c51.jpg
 

kad

Senior Member
Supporting Member
Joined
Jul 10, 2017
Posts
2,781
Reaction score
2,291
Location
Hudson Valley, NY
Ram Year
2014
Engine
5.7L HEMI
I added OEM front Parksense and installed the entire front system over a month ago working complete as if factory even with my 3.5" basic dash cluster. My truck came factory with rear Parksense and it is a 2017 Ram 2500 6.7 Tradesman. Everything works flawlessly but I just installed a gas 7" MY18 EVIC gauge cluster today and the front sensors will give the audible tone and it will show the rear sensors while approaching something in front of the vehicle but it does not show the front 'distance' lines for the front park sense. Only the rear. Again right before I swapped the cluster my factory MY17 3.5" EVIC would display both front and rear sensors distance lines. Before I enabled the front Parksense and only had rear Parksense I was able to choose if I wanted rear sensors displayed or just the tone and now that I have the front Parksense I cannot choose to display or not to display but with the 3.5 it always displayed both. Odd to me that just with the install of the premium evic it will not display front. Anyone have any ideas? 630bf1698d6024806db366bdff6a8c20.jpg02ba07f64e59dcec62fba08e1da7acaf.jpgf523e8799e8a2ab0739cfdae764a4c51.jpg

This isn't one I've done yet, but you might ask in this thread: https://www.ramforum.com/posts/1838084/ Despite the title, it's concerning boith the front and rear sensors.

-K
 

Austen

Senior Member
Joined
Jul 30, 2018
Posts
315
Reaction score
148
Location
Missouri
Ram Year
2017
Engine
6.7 Cummins
I added OEM front Parksense and installed the entire front system over a month ago working complete as if factory even with my 3.5" basic dash cluster. My truck came factory with rear Parksense and it is a 2017 Ram 2500 6.7 Tradesman. Everything works flawlessly but I just installed a gas 7" MY18 EVIC gauge cluster today and the front sensors will give the audible tone and it will show the rear sensors while approaching something in front of the vehicle but it does not show the front 'distance' lines for the front park sense. Only the rear. Again right before I swapped the cluster my factory MY17 3.5" EVIC would display both front and rear sensors distance lines. Before I enabled the front Parksense and only had rear Parksense I was able to choose if I wanted rear sensors displayed or just the tone and now that I have the front Parksense I cannot choose to display or not to display but with the 3.5 it always displayed both. Odd to me that just with the install of the premium evic it will not display front. Anyone have any ideas? 630bf1698d6024806db366bdff6a8c20.jpg02ba07f64e59dcec62fba08e1da7acaf.jpgf523e8799e8a2ab0739cfdae764a4c51.jpg
UPDATE: For whatever reason my factory 3.5" EVIC would display both front & rear park sensors even though my truck came factory with only rear Parksense. When I added the OEM front Parksense I only enabled the front Parksense CSM in the BCM because I did not realize there was another option to enable due to the fact that it was working as if it came factory without enabling anything, just by installing the harness, sensors, and switch bank. Today I found 'PTS Confirmation' in the BCM and it was set to 'Rear'. I changed it to 'Front and Rear' and now my 7" EVIC I added yesterday now displays the front Parksense. Why the 3.5" EVIC that never had front PTS would display without it being enabled but the 7" EVIC wouldn't I have no idea but it is all working great now! Hopefully my long explanation makes sense and if anyone ever comes across this issue this helps them. d7017d195b413cc3aeda5c5a0b432cbb.jpg
 
Last edited:

duckman631

Senior Member
Joined
Jan 9, 2019
Posts
328
Reaction score
228
Location
New Jersey
Ram Year
2016 Big Horn Crew Cab
Engine
Hemi 5.7 K&N Cold Air Intake.
Just a few minor mods on my interior all thanks to Ram Forum members.

Door latch covers

Vg3VcxU.jpg

Thin Blue Line muted Canadian flag

sEcuSPY.jpg

Mopar Seat Belt Cover & Leatherette Grab Bar Cover

3wIYbDo.jpg
RCilATt.jpg
5fjgsmH.jpg
eeDgGH7.jpg

Husky Weatherbeaters
EPDY5JJ.jpg
XkahFqw.jpg
Where did you get the grab handle covers?
 

joeygster

Senior Member
Joined
Sep 21, 2015
Posts
1,834
Reaction score
1,219
Location
Ancaster, Ontario
Ram Year
2016 Ram 1500 Sport Crew Bright White
Engine
Hemi 5.7

22hemi13

Senior Member
Military
Joined
Mar 20, 2013
Posts
3,805
Reaction score
5,795
Location
Tucson AZ
Ram Year
2014 2500 4x4
Engine
5.7
Mine are simple. A sticker, 5.0 radio swap and added in front and rear cams. Oh and floor mats lol

B68197C0-3242-4749-8C2A-8331ACF43661.jpeg

1D7EDF42-82B7-4B18-AD0A-CB8386579E07.jpeg

0C0DE72F-A4ED-4A6A-A456-367AF2F71D09.jpeg

C71E1C89-5FAC-4FC4-AEDA-E7343670CFE1.jpeg
 
Top