M² Mods Intro & Project List

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Mpgrimm2

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,085
Reaction score
4,168
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
@Mpgrimm2 is there any way you could make me a harness?

I’m having zero luck with emails
Unfortunately I don't have the time to learn a new harness and order needed parts at the moment.
Deereguy's day job has him on a special project that's taking up most of his day (since mid December) and will get to everyone's request as best he can time permitting.

M² Mods.
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,527
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
Unfortunately I don't have the time to learn a new harness and order needed parts at the moment.
Deereguy's day job has him on a special project that's taking up most of his day (since mid December) and will get to everyone's request as best he can time permitting.

M² Mods.

Ok thanks
 

ricky_bobby

Junior Member
Joined
Jan 14, 2019
Posts
16
Reaction score
4
Location
Wake County, NC
Ram Year
2018
Engine
6.7L Cummins
Hey guys - not sure of the 30+ pages but do you make a conversion harness for guys going from halogen to Mopar LED tails? A lot of guys able to have sales codes flashed at dealer, or enable the LED tails with AlfaOBD - Basically using these parts and some wire loom -

1) LED Tail Pigtail Wiring Harness –Available from Mopar Online Parts.
· P/N 5013984AA – QTY 2

2) EV6 Male Connectors – Available from InjectorRX (Fuel Injector Cleaning Service, Flow Testing & Outboard fuel injectors).
· Bosch EV6 Male Connector – QTY 2

3) H13/9008 Male Pigtails – Available from Autolumination (www.autolumination.com Tail Light Brake Light Turn Signal LED Bulbs).
· Male Pigtail – QTY 2

Add some loom and some wire and you have a beautiful conversion harness that isn't $135 - To replace #2, which is the most expensive piece, a guy on the Cumminsforum has shared the following if it helps - (I chimed in there as well) - he talks about cutting off the stock wiring plugs but with the 2 parts above you should be fine with leaving them intact - and with the more affordable "LED tail lamp plug" and pins it may make for a very affordable conversion I am hoping -

https://www.cumminsforum.com/forum/28856635-post49.html
 
OP
OP
Mpgrimm2

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,085
Reaction score
4,168
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
Pm sent. (Nope, We generally refer people to The RetroShop)

M² Mods.
 

Csucsi

Junior Member
Joined
Jan 14, 2019
Posts
1
Reaction score
1
Location
Cnj
Ram Year
13
Engine
Cummins
Hello everybody I’ve been trolling here for about two weeks and I noticed that M2 mods makes harnesses for the seven speed module resister and the single temp zone control bezel thing is there anyway I can get in line for a harness of the long variety for my 13 8.4 conversion truck is 4 speed fan now but I bought the resistor and I am actively seeking a module and the harness also
I hope I posted this in the right place thanks in advance Tom
 
OP
OP
Mpgrimm2

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,085
Reaction score
4,168
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L

likes2build

Senior Member
Joined
Jun 12, 2018
Posts
1,222
Reaction score
1,151
Location
Mohawk Valley, NY
Ram Year
2018 Express RCSB
Engine
3.6 Pentastar
A great BIG thank you to M2Mods @Mpgrimm2 and his fantastic harnesses and tech support (without laughing, lol) !!!!! I seem to have needed some lessons in pinning a connector and he was there to avert a total F'n disaster.

His wiring is sooooo nice, I removed my not so nice Infotainment microphone harness and installed a 2016 mirror w/a 2018 microphone conversion harness w/camera bypass and a lead up the A pillar to the the humidity sensor. Plus a second beautiful harness to change my UAQ MTC control to full ATC. I also changed the hockey puck antenna to a shark fin with all the wiring in between for cell service.

So I now have ATC, microphone in the mirror (people can hear me much clearer), auto dim, smart beam and soon to have AT&T cell service hot spot in the radio.

And not to be left out of the accolades is @DeereGuy for my overhead console harness w/homelink and his wonderful 2018 bypass harness to turn all the "good stuff" on without paying the dealer $$$$$$$$$ for 20+ options.

M2Mods rock and I said it before but I don't mind saying it again.........

"You can pay more but you can't buy better than a M2Mods product"
 
Last edited:

WilliamS

Senior Member
Joined
May 3, 2016
Posts
2,638
Reaction score
1,191
Location
Tampa FL
Ram Year
2014
Engine
Hemi 5.7
Time to start looking at keyless entry push button start kits!
 
OP
OP
Mpgrimm2

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,085
Reaction score
4,168
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
-------------------- HOLD on New Orders -------------------------

1/23/19 - I'm also putting a hold on new orders while I gather needed tax info (way behind). I will continue to work on existing orders/backlog in the meantime and will update the thread when I am able to take new orders.

Mike G.
Mpgrimm2

1/12/19 -
I know that there are several members that have placed orders with me that are waiting for the orders to be built and delivered. Please rest assured that I do have your order in my backlog and am working on filling orders as quickly as possible. Since the middle of December I have been working crazy hours at work and have not been able to build many harnesses. Unfortunately I do not see this changing anytime soon and as a result, I will not be accepting any new orders until I have my backlog filled. The only exception to this is the security module bypass which I will continue to take orders for.

I will post an update to this thread when I have my backlog complete and am in a place to begin accepting orders again.

Thanks for you understanding and patience.

Mike D
DeereGuy

---------------------------------------------------------------
 

Mangelhaft

Junior Member
Joined
Oct 16, 2018
Posts
4
Reaction score
0
Location
Michigan
Ram Year
2018
Engine
5.7
What does the RAM 4C (UAS/UAQ) Media Hub Adapter Harness allow one to install/modify?
 

kad

Senior Member
Supporting Member
Joined
Jul 10, 2017
Posts
2,781
Reaction score
2,291
Location
Hudson Valley, NY
Ram Year
2014
Engine
5.7L HEMI
What does the RAM 4C (UAS/UAQ) Media Hub Adapter Harness allow one to install/modify?

It lets you use the newer media hub that goes with the UAS/UAQ radios and allows Carplay/Android Auto to work without having run a whole new harness all the way through the dash and console/jumpseat.

-K
 

likes2build

Senior Member
Joined
Jun 12, 2018
Posts
1,222
Reaction score
1,151
Location
Mohawk Valley, NY
Ram Year
2018 Express RCSB
Engine
3.6 Pentastar
2018's usually don't need it. If the UAS / UAQ is from a Ram and not another vehicle like say a Jeep, the OEM installed media hub just might work without switching anything. Don't quote me, as there are others here that know way more than me. Mine is an '18 and it worked without switching anything.
 
Last edited:

Blake Underwood

Junior Member
Joined
Jan 22, 2019
Posts
4
Reaction score
0
Location
WA
Ram Year
2016
Engine
6.4 Hemi
Mpgrimm2,

Let me know when you take orders again...

As you could see from the backup camera thread...

I’m looking for a harness and whatever other parts I need for my 4-door cab & chassis.

TIA
 
OP
OP
Mpgrimm2

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,085
Reaction score
4,168
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
Mpgrimm2,

Let me know when you take orders again...

As you could see from the backup camera thread...

I’m looking for a harness and whatever other parts I need for my 4-door cab & chassis.

TIA
Send me a pm with your contact info and a time to call after 11am EST and we can discuss what you've got.

M² Mods.
 

Simpsj2

Member
Joined
Nov 19, 2017
Posts
85
Reaction score
20
Ram Year
2012
Engine
Hemi 5.7
pm'd deere guy before reliezing you guys had a page.
 
OP
OP
Mpgrimm2

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,085
Reaction score
4,168
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
Just an FYI. Can't update the OP at the moment until we get it our vendor status squared away that dropped off early. Working on it.

Mike G.



M² Mods.
 

Maverick87r

Junior Member
Joined
Feb 13, 2019
Posts
6
Reaction score
0
Location
Texas
Ram Year
2016
Engine
5.7L Hemi
interested in the media hub adapter when you guys are ready to take more orders
 
Top