Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Just over the top edge. Should still be able to get it in there. If not I used the mounts and the whole thing will just cone off. It's the Putco blade, you can mount it either way. Also used the 5 pin flat adapter so no splicing for back up lightsDid you go over the spare tire hole with the light bar or how did you do it?
What lift did you have in it?Finally got the lift off my truck this weekend and got the lowering kit on. I couldn't stand it lifted.
View attachment 163005 View attachment 163006 View attachment 163007
I dig both but lifted looked so goodFinally got the lift off my truck this weekend and got the lowering kit on. I couldn't stand it lifted.
View attachment 163005 View attachment 163006 View attachment 163007
What lift did you have in it?
I dig both but lifted looked so good
What is the lower air box mod?
Sent from my iPad using Tapatalk
Interesting tidbit. I run an AEM Dryflow filter on my 5.7 and when this mod was first posted I went and looked up the Dryflow for the EcoD/6.4 to see if I'd need to replace it as part of the mod. They list the same AEM Dryflow for the EcoD, the 5.7 and the 6.4.
-K
Exactly...filter is the same size since the upper half of the air box didn't change!
TXCOMT
I swapped out my factory tail lights for OLED....... They look sick!