Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Just wanna put this out there for anyone with the laser cut mats,
I pressed my gas pedal all the way down and the mat held it there! Scared the crap out of me.
These have to be cut like the pic ive included. Personally i think they need a redesign and more material should go up under pedal.
I suggest pressing pedal to the floor with truck off to see if you have this same issue before it happens while your driving.View attachment 166491
I have the laser cut crew cab floor mats
Part # EO1001R021
There is another review on amazon that stated the same problem. I dont have a pic of it stuck, but every time i pushed pedal all the way down it got stuck until i removed the material in that pic.
It may not happen to everyone because the pedal is adjustable, im thinking if the pedal is raised it wont bottom out on the floor. I drive with the pedal in the lowest setting though.
3 more inches up past the pedal and it wouldnt happen.
Had fixed the problem.I do really like the mats, they fit and feel better (other then this one issue) then the maxliners i had in my 08 ram. Hope they come up with a fix for the front but cutting it like i did has been fine.
Sorry, not yet.Any plans for a rear mat for the hd mega cabs.
Sent from my SM-G965U using Tapatalk
The green one is the gas pedal, if they came straight across and as high as the brake pedal area there would be no interferences. This only seems to happen if adjustable pedal is on lowest setting, once raised the pedal does not go to the floor any more and wont get stuck under mat.
If this does get a redesign have them add a few more inches to the passenger side also!
I have the laser cut crew cab floor mats
Part # EO1001R021
There is another review on amazon that stated the same problem. I dont have a pic of it stuck, but every time i pushed pedal all the way down it got stuck until i removed the material in that pic.
It may not happen to everyone because the pedal is adjustable, im thinking if the pedal is raised it wont bottom out on the floor. I drive with the pedal in the lowest setting though.
3 more inches up past the pedal and it wouldnt happen.