How to get rid of the fender flare glue?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joeswole

Member
Joined
Apr 21, 2020
Posts
31
Reaction score
8
Location
Florida
Ram Year
2002
Engine
4.7
After removing the fender flares on my truck that had been on their for years the glue or whatever they used stuck on their. I tried using a heat gun but didn’t really work any thoughts


Sent from my iPhone using Tapatalk
 

stimpy433

Senior Member
Joined
Mar 10, 2016
Posts
3,583
Reaction score
3,163
Location
IOWA
Ram Year
2014
Engine
3.6
Yeah, most auto parts stores carry them or I got mine off of amazon.
 
OP
OP
Joeswole

Joeswole

Member
Joined
Apr 21, 2020
Posts
31
Reaction score
8
Location
Florida
Ram Year
2002
Engine
4.7
Yeah, most auto parts stores carry them or I got mine off of amazon.

I ordered it hopefully it works because this glue is thick and hard as a rock lol


Sent from my iPhone using Tapatalk
 

Smokeybear01

Senior Member
Military
Joined
Jan 25, 2020
Posts
449
Reaction score
213
Location
US-NW Coast
Ram Year
2005
Engine
Cummins 5.9
While you wait for your eraser wheel, try some 'Goo Gone' or 'Graffiti Remover'. The Goo Gone can be had in small bottles at Dollar Tree. I've had good luck removing hard dried glue with it, but you can't use soap and water with it or it won't work, just let it soak. The graffiti remover is harsh on paint and a last resort, but it will take everything off, probably down to bare metal.
 
OP
OP
Joeswole

Joeswole

Member
Joined
Apr 21, 2020
Posts
31
Reaction score
8
Location
Florida
Ram Year
2002
Engine
4.7
While you wait for your eraser wheel, try some 'Goo Gone' or 'Graffiti Remover'. The Goo Gone can be had in small bottles at Dollar Tree. I've had good luck removing hard dried glue with it, but you can't use soap and water with it or it won't work, just let it soak. The graffiti remover is harsh on paint and a last resort, but it will take everything off, probably down to bare metal.

I just got the wheel today, so tomorrow I’ll check it out one side has some hard stuff that they used it’s like JB weld almost


Sent from my iPhone using Tapatalk
 
Top