2012 Power Seat Harness Help

[sonofashopteacher]

First time posting here. I have a 2012 Ram 4x4 1500 Express Package with manual cloth seats. I bought a salvaged set of leather - power, heated & cooled seats (no airbags) also from a 2012 Ram.

I'm hoping you can help me out with the harness needed to get these functioning. I'm pretty capable with the mechanical side of things but when it comes to electrical diagrams my eyes cross and brain short circuits. Luckily I'll have a buddy help on the install.

Any help or guidance is humbly appreciated.

Thanks in Advance

 

[Mpgrimm2]

Sorry, I will not be supporting seat wiring in the 09-12 trucks which are electrically different than the 13-18 trucks and their matching seats

M² Mods.

 

[sonofashopteacher]

Thank you for your response. Any suggestions on who/where else I might try?

 

[Ricks Ram]

Thank you for your response. Any suggestions on who/where else I might try?

There was someone who posted a couple of days ago that had a 2012 that he built his own harness for. I can't remember his name but if you scroll through the posts you may be able to find him or hopefully he will see this post and respond. There have been people who have done it. His seats worked but the LED lights didn't illuminate in his switches when he turned on the seats which is a problemI have seen before with the 2012 trucks. . Unfortunately people usually upgrade the 13 and up trucks so there isn't much info floating around for the 09 to 12 trucks. Good luck hope you get them working. I upgraded to the Heated/Vented seats in my 14 Express and it's definitely worth figuring out. If you can read schematics and find them you could use them to build a harness. That's how I originally figured mine out.

Sent from my SM-G960U using Tapatalk

 

[Ervin]

I also have a 2012 Diesel that I would like to convert to power leather. I bought the dash buttons. Don't know if there is enuf wire to make them work. So if you find any info, I would appreciate it. If I find something, I will post it here.

 

[Mpgrimm2]

I also have a 2012 Diesel that I would like to convert to power leather. I bought the dash buttons. Don't know if there is enuf wire to make them work. So if you find any info, I would appreciate it. If I find something, I will post it here.

You will need to start a separate thread in the 4th gen Electronics Section for 09-12 Heated Seats and wheel upgrade (vs here in our vendor section).

M² Mods.