Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sorry it goes to my ra4 radio bezel I bought from infotainment
Yep that's where I got it from but I broke two wires on the switch they just dont sell the wire part
If the switch itself isn't broken you should be able to resolder them. If you don't have the tools to do so, drop me a PM. If you pay the shipping I can probably solder it back together for you. Or you might be able to find someone local to do it. It should be a quick job.
I'll have someone do it for me my eyesight isn't like it use to be.or would a double zone bezel work in my truck the one in it is a 7 spd fan with just single a/c
-K
Hi M2 mod
i have a 2013 ram1500 with the 5 inch screen.
i bought a 8.4 radio out of a 2018 ram with carplay made by panasonic and a new bezel with climate control.
Which harness do i need. I would like to purchase from you if possible. also if you have any other mod harnesses that would help i would like.
i think i also need to get an adaptor to connect the usb hub to the radio. please educate me if i have my information incorrect
I'll have someone do it for me my eyesight isn't like it use to be.or would a double zone bezel work in my truck the one in it is a 7 spd fan with just single a/c
I'll send you a message to get things started & get your questions answered for a full 8.4 upgrade.Thank you so much I bought the double zone bevel just in case there's a way to make it work it's going to be in next week until then I'm looking at getting this piece fixed
If this is the wrong place to ask please let me know. I have a 2020 3500 tradesman. Most of the winter I have a tailgate sander that blocks the rear camera in the tailgate. I’d like to find someway to tap into the factory harness somewhere and get a second camera (I’d just buy a mopar one and build a housing for it I’m thinking) to relocate to where the sander wouldn’t block it. Anyone done this make something similar before?
Sent from my iPhone using Tapatalk
You can always get the Chassis cab backup camera kt with the pickup truck adapter.
Mopar part numbers:
Pickup Camera Adaptor 82215671AB
User mountable camera 56038978AF
10 ft cable 68200274AA
or 30 ft cable 68239372AA