Convex mirror control switch for “newer” tow mirrors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

6.7CumminsDrvr

The Dude abides………
Joined
Dec 6, 2011
Posts
2,060
Reaction score
1,427
Location
Georgia
Ram Year
2021
Engine
392
Good evening Benny, I hope you can help. Is the switch for the convex mirror a separate switch or is it just one big intergrated one? Please see pic below. Trying to figure out how to use a “newer” set of tow mirrors with the power adjusting convex mirror on my 2014. Thanks!

6243BA38-9635-4E7C-9728-9B4ECE7CFAEE.jpg
 

AllMoparParts.com

- Benny
Preferred Vendor
Joined
Apr 9, 2013
Posts
2,560
Reaction score
619
Ram Year
All
Engine
All
Hi,

It is a separate switch # 52112478AA
upload_2020-11-20_20-6-5.png
upload_2020-11-20_20-6-33.png

The door trim panels are specific to this option so this tells me that the housing and trim plate are part of the door panel itself.

Please let me know if you have any other questions.
Thanks,
-Benny
 
OP
OP
6.7CumminsDrvr

6.7CumminsDrvr

The Dude abides………
Joined
Dec 6, 2011
Posts
2,060
Reaction score
1,427
Location
Georgia
Ram Year
2021
Engine
392
Hi,

It is a separate switch # 52112478AA
View attachment 228013
View attachment 228014

The door trim panels are specific to this option so this tells me that the housing and trim plate are part of the door panel itself.

Please let me know if you have any other questions.
Thanks,
-Benny


Thank you. If the switch is separate I might be able to make it fit in my door panel. Might not match perfectly since it won’t have the trim around but I might be able to make it work.
 

Snakedoctor00

Junior Member
Joined
Jun 15, 2021
Posts
10
Reaction score
0
Location
Florida
Ram Year
2021 Ram 2500
Engine
6.7 Diesel
I know this is an old post but did you ever get this option to work?

I would very much like the option of the power convex mirrors. I already have the power adj and power fold but manual moving convex. No idea why Chrysler went that route.
 
Top