Deereguy Status

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DeereGuy

Senior Member
Preferred Vendor
Supporting Member
Joined
Nov 9, 2016
Posts
623
Reaction score
577
Location
Pittsburgh, PA
Ram Year
2016
Engine
6.7 Cummins
I have recently accepted a new opportunity at work that is going to require a significant amount of travel. As a result, I am going to have to cut back on the number of harnesses that I can effectively offer. I will continue to build security bypass harnesses and UAx conversion harnesses. I will no longer be offering heated seat harnesses (3 Left) or cargo cam harnesses (5 left) after my part supply runs out. MPGrimm will take over the seat harness and cargo cam orders as his availability allows.

It's been a pleasure helping everyone complete these mods over the past several years! If you are interested in one of the harnesses while I still have parts, please let me know.

Thanks for you understanding!

Mike D (Deereguy)
 

Zair

Junior Member
Joined
Mar 1, 2020
Posts
1
Reaction score
0
Location
Dayton
Ram Year
2019
Engine
Hemi
Hello,
Im trying to purchase one of your product 5th generation security module bypass from kaodtech.com but system in not accepting any form of cards. I have tried 4-5 cards already but It giving me an error message that payment cant be processed contact your bank and try again later.
 

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,084
Reaction score
4,167
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
Also...
It will take me a bit to get all the info together and order parts before I can start building/offering the heated seat harnesses....

Picking up the cargo cam harness will take me a bit longer while I'm reworking the 8.4 conversion harness for future plans.

Plus I have my other harness projects, which is already a full plate with my regular job... Please be patient.

Mike G.

M² Mods.
 
Last edited:

sealw98

Junior Member
Joined
Jan 4, 2020
Posts
16
Reaction score
2
Location
detroit
Ram Year
2019
Engine
5.7 hemi
I reached out to you a couple months back regarding the rear heated seat control, I sent over photos but never heard back, congratulations on the new position, would you be able to reach out to me ?
 

WY.Ram

Senior Member
Supporting Member
Joined
Oct 26, 2015
Posts
534
Reaction score
505
Location
Larkspur, CO
Ram Year
2016
Engine
6.4L Hemi
Looks like I might be late but at your convenience I would buy a heated seat harness and cargo camera. I know there are guys ahead of me but if any one of them sells their truck, I'll be back here waiting in line.

'16 PWagon with a badass Greene tune feed'n & fire'n 6.4L with 6spd // 5.13 AAM // 37" KM3, -12mm // DOR, Purple Cranium // CAI, ARH, Solo Mach44 // z36, EBC // Custom Graphics, AVS, 4% VLT // Morimoto, Rigid, Diode Dynamics // Alfa, Diablo //.................
 

WY.Ram

Senior Member
Supporting Member
Joined
Oct 26, 2015
Posts
534
Reaction score
505
Location
Larkspur, CO
Ram Year
2016
Engine
6.4L Hemi
I also have no problem waiting for @Mpgrimm2 either, I'd sign up to be the first one in your line for both harnesses. Am not in a hurry, I have my heated steering wheel but not even acquired the seats yet. (Always looking if any body ever knows.)
Pretty sure I read that i need the heated seat harness and module for the heated wheel, but seats are also in the plan any way.
Ok just sayin

'16 PWagon with a badass Greene tune feed'n & fire'n 6.4L with 6spd // 5.13 AAM // 37" KM3, -12mm // DOR, Purple Cranium // CAI, ARH, Solo Mach44 // z36, EBC // Custom Graphics, AVS, 4% VLT // Morimoto, Rigid, Diode Dynamics // Alfa, Diablo //.................
 

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,084
Reaction score
4,167
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
If you need to reach DeereGuy, you can start a private message/conversation (click his profile) or check the web page he set up for his projects at www.kaodtech.com

Thanks,
Mike G.

M² Mods.
 

WY.Ram

Senior Member
Supporting Member
Joined
Oct 26, 2015
Posts
534
Reaction score
505
Location
Larkspur, CO
Ram Year
2016
Engine
6.4L Hemi
If you need to reach DeereGuy, you can start a private message/conversation (click his profile) or check the web page he set up for his projects at www.kaodtech.com

Thanks,
Mike G.

M² Mods.
Coolio, thanks. I'll just keep an eye on you and when you're ready I'll bug you. :)

'16 PWagon with a badass Greene tune feed'n & fire'n 6.4L with 6spd // 5.13 AAM // 37" KM3, -12mm // DOR, Purple Cranium // CAI, ARH, Solo Mach44 // z36, EBC // Custom Graphics, AVS, 4% VLT // Morimoto, Rigid, Diode Dynamics // Alfa, Diablo //.................
 

circuitguy

Senior Member
Joined
Aug 10, 2018
Posts
1,930
Reaction score
1,556
Location
Elk Grove, CA
Ram Year
2017 Ram Tradesman Regular Cab
Engine
5.7L HEMI
I have recently accepted a new opportunity at work that is going to require a significant amount of travel. As a result, I am going to have to cut back on the number of harnesses that I can effectively offer. I will continue to build security bypass harnesses and UAx conversion harnesses. I will no longer be offering heated seat harnesses (3 Left) or cargo cam harnesses (5 left) after my part supply runs out. MPGrimm will take over the seat harness and cargo cam orders as his availability allows.

It's been a pleasure helping everyone complete these mods over the past several years! If you are interested in one of the harnesses while I still have parts, please let me know.

Thanks for you understanding!

Mike D (Deereguy)


I will take a cargo cam harness
 

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,084
Reaction score
4,167
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
All I can say on that is keep checking. @DeereGuy built and put up 5 sets last week that sold out quickly. Not sure when he'll have time to do so again.

M² Mods.
 

circuitguy

Senior Member
Joined
Aug 10, 2018
Posts
1,930
Reaction score
1,556
Location
Elk Grove, CA
Ram Year
2017 Ram Tradesman Regular Cab
Engine
5.7L HEMI
All I can say on that is keep checking. @DeereGuy built and put up 5 sets last week that sold out quickly. Not sure when he'll have time to do so again.

M² Mods.

I give up. I sent a few emails to him and PM's over six months ago with not one reply. I cant do much more than what I have to get one of these ordered up, Guess I am SOL on this one.....
 

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,084
Reaction score
4,167
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
Sorry about that C. It's something I would try and pickup if I had the extra time to handle it, but I've got a lot on my plate as it is.
Mike G.

M² Mods.
 

TNram

Senior Member
Joined
Jan 12, 2016
Posts
124
Reaction score
19
Location
Nashville
Ram Year
2017
Engine
5.7 Hemi
Since these are always out of stock, I decided to just make my own. I noticed in their website that they tap into the lighter power but didn’t see anything on the canbus. Where do people tap into that? I saw a video for 2500 but the wires are not there in my 1500
 
Top