the_nid
Member
- Joined
- Feb 16, 2021
- Posts
- 32
- Reaction score
- 3
- Location
- Bristow, Virginia
- Ram Year
- 2018
- Engine
- 3.6 L V6
YesDo you have the security bypass obd cable to connect to your obd?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
YesDo you have the security bypass obd cable to connect to your obd?
Have you had a chance to go into alpha, select Ram 1500, select Body Computer, select Body Computer My2018 Powernet, then click on Connect and once connected go to Select procedure to start, go all the way down to bottom of page and select Car configuration change. At this point start looking for the list of things to select yes on to turn your Park Assist on. If you have everything selected to yes that I sent you and it still doesn’t work, go back and look at you 2 plus connectors and MAKE sure you have the correct wire going into the correct location on the connectors.
I have the listing for "Parking" in Alfa, but there is no compatible module that matches my vehicle model year. It has listings for Parktronics Module MY2013, MY2013-17, MY2014-17 and MY2010-2012 I tried connecting to the two closest (the MY2017 ones), but it will not connect to either.
This is with the Android version of Alfa.
Select my 2017-2017
2013-2017
Can you do a system wiring test with Alpha when connected to the park assist module .
You will see the faults for all the front sensors but will be good to see what the rear sensors have to say
Are these oem sensors ?That's the part number I bought
I bought the module on eBay, but if it was defective I would expect to see something in the faults with Alfa. The sensors are Bosch...bought those on eBay as well.
I won’t be the can bus wires as he can connect to the module and if it was reversed the whole truck would be freaking out .Those are the same ones I bought and have worked great for me. I would say it is in wiring or your canbus wires are reversed.
Sent from my iPhone using Tapatalk
I won’t be the can bus wires as he can connect to the module and if it was reversed the whole truck would be freaking out .
It’s either the sensor wiring like you have mentioned or bad sensors .
Pretty sure canbus is correct. I tried reversing the wires and got errors stating that the park assist was not found. I bought new sensors and will try them when they get here.