AlfaOBD

[Jimmy07]

will my security bypass cable for my 2018 work on a new body style 2019 plus or are they different? Thanks

If your 2018 bypass cable is for the 2500 in your signature, it will work on the 2019+ 5th gen 1500 (new DT body style) trucks. For it to work on a 2019+ HD Ram, you would need to snap of one of the raised key way ribs on the green canbus connector.

 

[SRich2015]

If your 2018 bypass cable is for the 2500 in your signature, it will work on the 2019+ 5th gen 1500 (new DT body style) trucks. For it to work on a 2019+ HD Ram, you would need to snap of one of the raised key way ribs on the green canbus connector.

Thanks, I let someone borrow it and he has a 2019 3500. I'll let him know he will need the 2019+ HD cable.

 

[Gus T]

Hey guys I have been looking all though the posts to find the settings I need. I just installed the 52 gal titan tank in my 14 2500. I want to adjust the DTE as well as have the gauge more accurate than just staying on full for 250 miles before it moves. Can anyone point me in the right direction? Thanks so much.

 

[Jimmy07]

Hey guys I have been looking all though the posts to find the settings I need. I just installed the 52 gal titan tank in my 14 2500. I want to adjust the DTE as well as have the gauge more accurate than just staying on full for 250 miles before it moves. Can anyone point me in the right direction? Thanks so much.

Try these:
VehConfig 3: Fuel capacity- 194 liters
ECUConfig 4: Fuel capacity- 194 liters
These are the highest values that work, and should get you close enough.

 

[Gus T]

Try these:
VehConfig 3: Fuel capacity- 194 liters
ECUConfig 4: Fuel capacity- 194 liters
These are the highest values that work, and should get you close enough.

Do you think those are the only setting I would have to change? I read about the 1500 guys having to change more settings when the go to the 32 gal tank? Thanks

 

[Jimmy07]

Do you think those are the only setting I would have to change? I read about the 1500 guys having to change more settings when the go to the 32 gal tank? Thanks

Those would be it. Not sure what else someone would change, but those are the only two that have to do with fuel tank size.

 

[Gus T]

Those would be it. Not sure what else someone would change, but those are the only two that have to do with fuel tank size.

Where do I find the ECU config? I don't see that option under the car configuration change.

 

[Kenepo17ram]

Where do I find the ECU config? I don't see that option under the car configuration change.

You scroll up thru all the settings?

Sent from my SM-N986U using Tapatalk

 

[Jimmy07]

Where do I find the ECU config? I don't see that option under the car configuration change.

That one might not show up depending what year bcm it connects as. You can use the windows version to pull up the 2018 settings list. Otherwise, just try the VehConfig 3 setting.

 

[Gus T]

You scroll up thru all the settings?

Sent from my SM-N986U using Tapatalk

I find the ECUconfig 4 settings but there isn't one for fuel

 

[Caterpillar]

Hello, I still cannot program my fobiks after dozens of tries: the application runs without stopping, say wait

ref. GQ4-54T ebay.com



suggestions



Thanks

 

[Jimmy07]

Hello, I still cannot program my fobiks after dozens of tries: the application runs without stopping, say wait

ref. GQ4-54T ebay.com



suggestions



Thanks

They are bad fobs, or fobs that are programmed to another vehicle.

 

[Caterpillar]

They are bad fobs, or fobs that are programmed to another vehicle.

Thank you Jimmy07 but they are new

 

[Jimmy07]

Thank you Jimmy07 but they are new

New mopar in sealed bag, or new aftermarket brand?

 

[chrisbh17]

Thank you Jimmy07 but they are new

When I added Enter N Go I ordered one fob from Ebay and another from the Amazon link in the thread. The ebay one was half price, but did not work at all. It probably was brand new, but it just wouldnt program.

The Amazon one worked first try. I later got a good deal on a brand new unused stock fob and that one worked on the first try as well.

My advice would be get the KeylessOption branded fob from Amazon. Thats the only aftermarket one that seems to work.

 

[wickedswede]

Why would you want to set it to 90 km anyway that’s only like 55 miles an hour

Hi , thanks for your answers ,, I want to change because here in Sweden the RAM will be
registered as a heavy vehicle ,, and heavy vehicles here are not allowed to have a top speed for more then 90km/h .

as soon as the registration process is done I would remove the speed limit ,, at least that was my idea

 

[Caterpillar]

New mopar in sealed bag, or new aftermarket brand?

new aftermarket

 

[Caterpillar]

When I added Enter N Go I ordered one fob from Ebay and another from the Amazon link in the thread. The ebay one was half price, but did not work at all. It probably was brand new, but it just wouldnt program.

The Amazon one worked first try. I later got a good deal on a brand new unused stock fob and that one worked on the first try as well.

My advice would be get the KeylessOption branded fob from Amazon. Thats the only aftermarket one that seems to work.

Thank, i will see amazon

 

[Caterpillar]

https://www.amazon.com/KeylessOptio...-16227------------1&vehicleName=2016+Ram+1500


I only found this model and I need 5 functions

 

[Jimmy07]

https://www.amazon.com/KeylessOptio...-16227------------1&vehicleName=2016+Ram+1500


I only found this model and I need 5 functions

https://www.amazon.com/KeylessOptio...00,+GQ4-54T+(Pack+of+2)&qid=1618238359&sr=8-1