Recall v50 performed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Syke001

Junior Member
Joined
Jun 5, 2015
Posts
19
Reaction score
0
Ram Year
2013
Engine
Hemi 5.7
I had this recall performed in late 2019 and now on my first smog the fuel trim seems to be failing at 1.015 both banks any help and not say go to dealer
 

Tach_tech

Senior Member
Joined
Jun 1, 2014
Posts
3,307
Reaction score
3,555
Ram Year
2017
Engine
5.7L HEMI
The recall wouldn’t cause you to fail. That recall was just to correct an issue where some dtcs would not clear properly.

Are you able to view your long term fuel trims with a scan tool?
 

Burla

Senior Member
Military
Joined
Apr 28, 2012
Posts
23,111
Reaction score
44,453
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
Take the air filter off, jokin kinda.
 
OP
OP
S

Syke001

Junior Member
Joined
Jun 5, 2015
Posts
19
Reaction score
0
Ram Year
2013
Engine
Hemi 5.7
Yes I can min is 1.09 and I’m reading 1.015 on both banks when I try looking it thru o2 scan says that there’s no b1s1 or b2s1 available
 

Rlaf75

Senior Member
Joined
Nov 13, 2015
Posts
1,488
Reaction score
1,504
Location
East Hartford CT
Ram Year
2011
Engine
Hemi 5.7
The recall wouldn’t cause you to fail. That recall was just to correct an issue where some dtcs would not clear properly.

Are you able to view your long term fuel trims with a scan tool?
Most descent scan tools can
 

Tach_tech

Senior Member
Joined
Jun 1, 2014
Posts
3,307
Reaction score
3,555
Ram Year
2017
Engine
5.7L HEMI
Yes I can min is 1.09 and I’m reading 1.015 on both banks when I try looking it thru o2 scan says that there’s no b1s1 or b2s1 available
If your fuel trims are at 1, that’s not an issue. Are you sure you’re looking at the trim numbers and not voltage? Fuel trim numbers won’t have a decimal Like 1.09. They will also be + or -
 
Last edited:
OP
OP
S

Syke001

Junior Member
Joined
Jun 5, 2015
Posts
19
Reaction score
0
Ram Year
2013
Engine
Hemi 5.7
I go to on board monitoring. Bank 1 fuel trim min 1.09 max 1.999 test 1.015 fail. On the readiness fuel trim incomplete I changed a/f sensor map sensor pvc intake manifold gaskets tb gaskets exhaust gaskets no codes or light
 
Top