A_mod_too_far
Senior Member
So my original 10 year old back up camera had deteriotion inside the lense. I ordered a $40 chinese replacement on Ebay which worked but didnt have a fisheye lense and also the contrast was horrible. I replaced both wiring harness in the tail gate since they looked old. Anyways, I had the idea of switching the oem camera chip into the ebay camera. Unfortunately the lense couldn't focus in a non fish eye case. However after all this I reassembled both cameras back to original and planned to just use the ebay cam. When everything was reinstalled I just got a blue screen and my bcm said error u0264. I checked the fuse and had power at the at the fuse. Checked power and ground at the harness, which was good. I also had 12 volts on the lin bus line.
My question is, is there anything I can test inside the camera or further on the vehicle before I accept that I killed both cameras and buy a new one? I just dont understand how both cameras are now giving me blue screens. I could understand if I killed one, but both? Makes me nervous if I didnt do something more severe to the bcm or radio?
Reference sites
My question is, is there anything I can test inside the camera or further on the vehicle before I accept that I killed both cameras and buy a new one? I just dont understand how both cameras are now giving me blue screens. I could understand if I killed one, but both? Makes me nervous if I didnt do something more severe to the bcm or radio?
Reference sites
U0264 - RAM Diagnostic Trouble Code (DTC) Definition, Causes and Diagnosis
U0264 RAM Diagnostic Trouble Code (DTC) Definition, Causes and Diagnosis
www.dtcdecode.com
Hotlinking to Mopar1973Man.Com
mopar1973man.com