-
-
01_Cummins_4x4 reacted to Mpgrimm2's post in the thread How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman with
Like.
Long story short I can make the needed add-on harness, but there's a bit of a wait/build list for it... Send me a message if interested... -
01_Cummins_4x4 reacted to Mpgrimm2's post in the thread How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman with Like.
For those that have power driver seat or heated only front seats and want to check if they have the wiring to support heated & vented...
-
Nice write up. Subbed to reference for others if needed. I've got some notes I need to dig up about the 13-18/classic element and...
-
Howdy gents!!! Been a long time since Ive posted anything here. Recently had some heated seat issues in my 2017 Big Horn. Heated seat...
-
01_Cummins_4x4 reacted to Mpgrimm2's post in the thread How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman with Like.
Post up you're situation in that other thread as a reference if you can.
-
01_Cummins_4x4 reacted to Mpgrimm2's post in the thread How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman with Like.
Check out this post for my connector overview and... Jared4.7 's heated pad/element replacement thread ( & my resistance check notes).
-
01_Cummins_4x4 reacted to ricky_bobby's post in the thread How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman with Like.
Mike Grimm is a class act - he helped me a ton with my swap (Lucky enough for my 2018 Big Horn I had all heated/vented wiring and rear...
-
01_Cummins_4x4 reacted to Cool_Hand_Luke's post in the thread How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman with Like.
So I've been searching on this forum and elsewhere for help with installing heated steering wheel and heated seats. (Just front ones...
-
01_Cummins_4x4 replied to the thread AlfaOBD.Where do I find the "steering angle sensor calibration/reset" spot within Alfaobd? I had to change out my clock spring and I need to...
-
Please Read!!! Supported years: 2013 to 2018 Make a backup of your original BCM configuration before making any changes. While we have...
-
01_Cummins_4x4 replied to the thread RADIO UPGRADE RAM 2016.Wrong forum!
-
01_Cummins_4x4 replied to the thread 2002 PCM issues - Multiple failures - interesting case - need help to solve.This is posted in the wrong forum. A 2002 1500 is a 3rd gen pickup.
-
Yes if you have factory heated seats the vented seats will work plug and play if as long as you have the 8.4 radio and you enable the...
-
I do not have a spreader so I put the diff in the freezer over night and run a heater on housing and it slides right in Try a speedy...
-
01_Cummins_4x4 replied to the thread Lost brakes 2001 2500 Dodge Ram 4x4 Diesel 5 speed.Sounds like the brake master cylinder failed. Do you have rear disc or drum brakes? If you have rear drum brakes, check the rear wheel...
-
-
Loading…
-
Loading…
Members online
- chuckster123
- 2016 2500
- buckeyexx
- fgrammens3
- Fritter
- Dean2
- DanAR
- Bmags
- Biker
- Mardye
- Hemi drifter
- Rambolt
- bad_karma101
- mboymopar
- corneileous
- WSix
- Shutterbug57
- Thonaseragirl
- datsmer53
- Rob_R
- Daw14
- Keith1
- BenWade
- TC
- Jas34
- Mike R
- Wild one
- Farmer Fran
- whtmontie
- GeauxinUp
- Atl-atl
- RamDiver
- joshrdez91
- Slinge
- ToxicFire
- John Jensen
- JohnCA
- Travis8352
- Mikeacarroll
- Kstew2670
- tzmndvl308