04RAM_3
Reaction score
18

Latest activity Postings About

    • 04RAM_3
      04RAM_3 replied to the thread No Low End Power On 04 4.7.
      I guess I'm on my own here
    • 04RAM_3
      04RAM_3 replied to the thread No Low End Power On 04 4.7.
      It's been like this since I drove it home. Exhaust is good. Has new Flowmaster on it. I took the CAI back off today and went back to...
    • 04RAM_3
      04RAM_3 replied to the thread No Low End Power On 04 4.7.
      The CAI isn't clogged. I just recently put it on there. That's sad to hear about the mileage. No codes last time I checked. It really...
    • 04RAM_3
      04RAM_3 replied to the thread No Low End Power On 04 4.7.
      If it's under 2500 rpm it's a pig. After that it's alright. My tires are a 265/70/17 The motor looks like it was replaced. It's too...
    • 04RAM_3
      I recently bought an 04 Standard Cab 4.7 five speed manual 4x4 RAM 1500. I love the truck but it is GUTLESS!!! I know it's a small...
    • 04RAM_3
      04RAM_3 replied to the thread wheel spacer ?'s.
      I ran 1.5" all the way around on a Bronco I used to have. 8" lift and 35" tires. Never once had an issue. They were cheapies from amazon...
    • 04RAM_3
      04RAM_3 replied to the thread Standard Cab Rear Speaker Size?.
      5 1/4"
    • 04RAM_3
      04RAM_3 replied to the thread Got Warm.
      I figured while it was already apart I should just bite the bullet and do it. It was a good move. Since then though, I have changed to...
    • 04RAM_3
      04RAM_3 reacted to Daw14's post in the thread Gearing? with Like Like.
      What matters most is it a four wheel drive . If so the gears must be replaced with the same ratio . If two whell drive any will work ...
    • 04RAM_3
      04RAM_3 reacted to 2003F350's post in the thread Gearing? with Like Like.
      Yes, the rear end between a manual and an auto are the same. There were multiple gear ratios available for each, so you're going to need...
    • 04RAM_3
      04RAM_3 replied to the thread Gearing?.
      That's what I'm asking about. Are the gears for an automatic the same as the gears for a manual? I ask because years ago I converted a...
    • 04RAM_3
      04RAM_3 reacted to Tulecreeper's post in the thread Gearing? with Like Like.
      Shoot, then I wasted a little yellow sticky. :cool: Just get a rear end with the same gearing that you currently have and all the holes...
    • 04RAM_3
      04RAM_3 reacted to Tulecreeper's post in the thread Gearing? with Like Like.
      All else being equal, the gear ratio should be the same. I'll make a guess as to why you are asking. It's because of the difference in...
    • 04RAM_3
      04RAM_3 replied to the thread Gearing?.
      Actually, it's because my rear end is failing and I'm sure it's going to be much easier to find a rear end from an auto truck than a...
    • 04RAM_3
      04RAM_3 posted the thread Gearing? in Towing & Hauling.
      Is the rearend gearing different between a truck with an automatic vs. one with a standard?
  • Loading…
  • Loading…
Top