Recent content by 13RamOutdoorsman

  1. 1

    CEL and High Oil Pressure.

    I’m following what you’re saying. Temp doesn’t seem to matter. Oil pressure is still high when at operating temp. Oil and filter already had 900 miles on it when the problem started.
  2. 1

    CEL and High Oil Pressure.

    Thanks again guys I really appreciate the responses! I was able to swing by the house and check codes. P0520 is the code I pulled. The Great Google says that’s an oil pressure sensor. It sure is nice to have a sharp group of individuals to bounce questions off of. Oil is fresh only 900...
  3. 1

    CEL and High Oil Pressure.

    Thank you for your quick reply. I’m leaning towards sensor at the moment. Prior the valve spring failure the pressure was around 30 at idle and around 50 at speed. It’s possible that it’s been flaky for a while. I’ll post up codes when I get them pulled.
  4. 1

    CEL and High Oil Pressure.

    Good morning, I remote started my truck before leaving my house. The truck shut itself down less than a minute after starting. I got in the truck to leave and found a CEL. Started looking for things that seemed odd and the only thing I’ve noticed is that oil pressure is much higher than...
  5. 1

    Any former Toyota 4x4 guys here?

    That makes more sense. LOL Thank you for the link I’ll take a look.
  6. 1

    Any former Toyota 4x4 guys here?

    What is an FWC? Fat White Chick...
  7. 1

    Brake caliper question

    Everyone has said the same thing basically. Before I ever remove anything I use a large C Clamp and place it over the top of the caliper. The stationary end of the clamp goes on the back of the caliper and the screw part goes on the wheel side brake pad. On our trucks you will have to move...
  8. 1

    Window trim

    @AllMoparParts.com I don’t want to hijack this thread, but have some needs I’d like to discuss. How do send a personal message?
  9. 1

    Hub and Bearing

    OP, you might check out Unit Bearing Assembly replacements. I believe Dynatrac and Yukon Gear make them now.
  10. 1

    Need help deciding on flowmaster muffler

    I am stock with just a flow master 40. No resonator and dumped in front of the rear axle. I love the sound, but anything that can rattle in the interior now does.
  11. 1

    Military Roll Call!!

    Active Duty US Air Force 2000-2011 Honorably discharged as a SSgt E5. Proud to have served and blessed by those who have and are currently serving. Thank you all for your Service!
  12. 1

    Intermittent issue and warranty almost done!

    I have a similar issue on my 13, but it's the LCD not the gauges that flash. I've noticed that the dimmer has no affect on it. It only seems to happen if the light switch is set to auto or off. If I actually turn the headlights on it stops. Quite annoying, but doesn't seem to cause any issues...
See more

Latest posts

Staff online

Members online

... and 8 more.
Total: 1,272 (members: 58, guests: 1,214)
Robots: 1,586

Forum statistics

Threads
195,476
Posts
2,870,723
Members
156,190
Latest member
chuckitt20

Share this page

Top