Recent content by 19Ram150098

  1. 19Ram150098

    Buying a 3500. need opinions.

    Thats what i was thinking. For 20,000 i could buy i way newer truck. But its hard to find a nice cummins long bed here. Everything is rusted and beat on
  2. 19Ram150098

    Buying a 3500. need opinions.

    I found a VERY clean 04 ram 3500 4x4 cummins turbo diesel (5.9 i believe) its a single axle, long bed with "crew cab". the mileage is 180,000. the dealer wants 20,000 for it. No rust anywhere, interior is flawless. 1 owner and garage kept. My question is, is $20,000 too much for this? also...
  3. 19Ram150098

    Vent issue

    So i looked under the dash and the yellow vacuum line goes from the control panel to the actuator looks good, if i move the actuator by hand it'll just stay on the vents. If i switch to defrost and back to vent it stays on defrost vents. Is it possible the actuator is losing suction?
  4. 19Ram150098

    Vent issue

    98 ram 1500. 5.2L. My air/heat only blows from the defrost vents. I checked the outside vaccum hose that comes through the firewall and its good. My Dash is cracked pretty bad, so I ordered a dash mat to cover it. So I will probably chip away at the dash to be able to see the inside where the...
  5. 19Ram150098

    Mystery stalling

    I just made a post with the exact issue, it was the crank sensor. Now i have no more stalling/shutting off
  6. 19Ram150098

    98 Ram shut off after warms up

    Its fixed!!! The crank sensor was the problem! Thanks for the input guys..
  7. 19Ram150098

    98 Ram shut off after warms up

    Nothing on the odometer, just ordered a crank sensor hopefully thats the problem.
  8. 19Ram150098

    2001 dodge ram 1500 5.9l- slight misfire

    The Jerking/Bucking could be a sign of the torque converter failing to lock up.. just a thought..
  9. 19Ram150098

    98 Ram shut off after warms up

    My 98 ram 5.2L starts and runs fine (no missing) after about 10 to 20 minutes it shuts off like someone turned the key, even if i have it revved to 3,000. It wont start back until it cools back down and it'll do the same thing again. only showed 1 code for the cam sensor. changed the cam...
  10. 19Ram150098

    5.9 bored .30 over?

    ok, thank you!
  11. 19Ram150098

    5.9 bored .30 over?

    When i bought my truck (98 ram 1500 5.9L) the owner said the engine was bored .30 over. Could anyone explain to me what exactly that means? Like does it have bigger pistons? and is it no longer a 360? i know its a stupid question, i was just curious
  12. 19Ram150098

    Cylinder head casting numbers?

    it was misfiring in cylinder one and running rough with some smoke out the tail pipe. when we pulled the spark plug the diode was melted off, before pulling the head we changed plugs and wires, tried marvel mystery oil thinking it was a stuck valve, changed distributor cap and button, nothing...
  13. 19Ram150098

    Cylinder head casting numbers?

    haha, right! it was actually JEGS. he was on speaker phone so i heard it myself, he said well we need to know the casting numbers to send you the right ones, my buddy said just send what ever heads came out factory in the truck. the guy said man there are a bunch of different heads that came...
  14. 19Ram150098

    Cylinder head casting numbers?

    ok, thank you!
  15. 19Ram150098

    flange / Donut gasket

    So i ended up using a donut gasket for my 96 jeep cherokee, i had to use the dremel tool to make it fit, but it works perfect with no leaks now! thanks for all the input
See more

Latest posts

Staff online

Members online

... and 20 more.
Total: 1,343 (members: 70, guests: 1,273)
Robots: 1,659

Forum statistics

Threads
195,596
Posts
2,872,299
Members
156,396
Latest member
mjcooper

Share this page

Top