Recent content by 2014RAM1500owner

  1. 2014RAM1500owner

    3.55 Rear End Whine

    I had a similar situation with my 2014. Lots of whine and groan while on our way back from Vegas. I had a local shop rebuild/replace the gears and regear it with 3.91’s and a true trac and all new bearings. I then installed a tuner to adjust for the change in gearing and the tires. No noise now...
  2. 2014RAM1500owner

    Cam phaser rattle?

    Are you sure you got each of the pushrods back into their cups on the rocker arms? A very common mistake that will give symptoms similar to what you are describing.
  3. 2014RAM1500owner

    2020 Ram 1500 Classic 2WD, Lifted vs leveled ?

    Here is my 4th gen 2wd with the MaxTrac 4.5 inch lift. My profile has pictures of it when I first bought it and this is a current pic. I am running Method NV 20X9 on 35" BFG KO2's. No rubbing or issues and rides great. I am installing the MaxTrac forged upper A-arms soon too.
  4. 2014RAM1500owner

    Front passenger seat Rattles

    Ditto. I feel like it is under the driver seat near the rear. Its an audible clunking or popping/
  5. 2014RAM1500owner

    Leaning towards a MaxTrac Suspension Lift

    You can't go wrong with the maxtrac stuff. I have the 4.5" lift on my 2wd 14' running 35's and I love it.
  6. 2014RAM1500owner

    Lifted with stock wheels.... post em here!!!

    The maxtrac 4.5 inch lift with fox shocks. Its a 2wd and no spacers the front is a spindle lift and increases the front width by 1 inch.
  7. 2014RAM1500owner

    Lifted with stock wheels.... post em here!!!

    Here is my 2014 1500 with 35’s on the stock 20x8’s.
  8. 2014RAM1500owner

    Affects of Spindle Lift and Level Spacer

    I have the 4.5 maxtrac Fox lift and I run 285/65/r20's or 34.6 tires just fine. There is one thing i have noticed coming from Ford and GM trucks. These Rams don't tolerate a lot of lift. Especially in 2wd. Also going to a hellwig rear sway bar helped the road manners tremendously.
  9. 2014RAM1500owner

    Thoughts on Flowmaster

    I have a Borla XR1 muffler with the factory resonators and it sounds great. No drone at any RPM and louder than magnaflow with similar build quality. Plus it’s a straight flow through design. Every flowmaster I have owned has had drone in some way shape or form. It’s the design of the chambered...
Top