Recent content by Aaron Gilliam

  1. A

    How to Add Overhead Console

    I apologize for the necro but just to help anyone else who is doing this. I ran into some pins for my other projects and also the bags sent from Rick on here. I found by measuring out the pins are a dead match and even fit into the connectors. Pins from molex mx150 are the same thing. I...
  2. A

    AlfaOBD

    Yeah I was actually looking at measuring the tire. I figured brands played a difference in circumference. Thanks for your tips. I knew it wouldn’t match. My friend who I’m doing this for wants it to be as close as possible. I told him it would never be 100% because of tire wear etc. Thanks...
  3. A

    AlfaOBD

    Does anyone know what settings for diameter of a 37” tire should be programmed into the bcm? I’ve used a tire calculator and for a 37x13.5r20 says it should be set to 2951mm. The Speedo is showing we are going 60, but gps’s are saying 57ish-58. The guy wants it pretty close. We went up to 2960...
  4. A

    AlfaOBD

    I have a question along these lines except I have to replace the WIN. Mine is messed up and stealership wants 700 for the win and 1 key plus 400 to program it. I already have alfaobd and OBDLink Mx and have added tons of stuff to my truck. But I’m u sure about the changing win. Do I just unplug...
  5. A

    2013 1500 axle nut size

    I had the same question rise with the axel nut size. Everyone I asked said 1-3/8, 35mm or 36mm. So I called the dealership and they pulled an axe shaft from their stock went to their service and it took a 36mm. So I’m totally confused. Mine is a 12 ram crew 4x4 and the boot is torn on the driver...
  6. A

    Added the upper glove box to my Express

    I just installed this in my 2012 ram express. However I can’t seem to find the pigtail for the light. Does anyone know where else it could be, or did it to come i this truck? The box came from a 2010. So I find it hard to believe they didn’t add it in 12. I know I should have gotten tan, but...
  7. A

    AlfaOBD

    It must retain the settings in an eeprom. Basically the same as with an arduino/3d printer. Upgrade firmware and still retains all your tweaks and mods inside the eeprom.
  8. A

    AlfaOBD

    I know a bit off subject with the vehicle type. Just so someone can update the list. A buddy came by with a 2013 Jeep Wrangler unlimited supercharged. He bought it and the TPMS kept saying zeros. Had discount tire change the tires and they found no sensors in the tires. I had a hunch the...
  9. A

    M² Mods Intro & Project List

    Ok cool. Thank you. How much would you charge to make that harness? See which is the best route..
  10. A

    AlfaOBD

    Yeah, Alexey and I have been working together, though he’s doing the hard work! Most of the fixes were for the 2012 rams back to 2009? Maybe even earlier. We found some mis match take take with the drive train control module and fixed the CCN connectivity. He’s amazing with this program!
  11. A

    AlfaOBD

    UPDATE: So have been working with Alexey, the developer of AlfaOBD. He’s amazing with his support and willingness to help the community. We together have found a few bugs. Such as he thought/got information the can system for cluster and other CCN was 500k. When Infact it’s 125k. So now I can...
  12. A

    M² Mods Intro & Project List

    I have a 12 ram that did not have oem uconnect/Bluetooth. I’ve already added the option. I have the module I just need a wiring diagram for the rear view mirror to the uconnect and radio. I have all the pigtails and terminals with crimpers. Can anyone supply the wiring diagram? If I had the...
  13. A

    AlfaOBD

    Depending on your model. I found it in several areas of my truck. I have a 2012. There is a setting under the main body control. If you look up several posts (maybe back 2 pages or so now) you’ll see where I had it on mine. Then there are 3 more settings under reconfigurable parameters. But...
  14. A

    AlfaOBD

    Ahh crapola. Thank you for that heads up. Even though the AE tool removed it, and the option isn’t in AE. Couldn’t you re add it via AlfaOBD? I’m glad you gave me that warning. See goes to show you. 50$ software + 80$ tool = reliability and trustworthy. AE = 520$ = HEADACHES.
  15. A

    AlfaOBD

    I’ll tell you what guys. Alexey is one hell of a guy. So you all know my truck is a little older than the rest of you. I bought it 2 years ago and I’m on a fixed income due to disabled. Anyways I couldn’t connect to my instrument panel without bringing down 125k lines. He apparently...
See more

Latest posts

Members online

Total: 328 (members: 10, guests: 318)
Robots: 1,074

Forum statistics

Threads
195,438
Posts
2,870,251
Members
156,135
Latest member
2023RamWarlock

Share this page

Top