Recent content by aimvee

  1. A

    AlfaOBD Support For 06~12 Rams

    Hey Guys. Has anyone replaced a Tipm and reconfigured with Alfa? If yes, what steps did you take . Thanks Sent from my SM-G965W using Tapatalk
  2. A

    5TH Gen Alfa OBD

    I don't have any info on it and I haven't tried. But from what I'm told it should work Sent from my SM-G965W using Tapatalk
  3. A

    AlfaOBD

    2014 1500. Installing a new PCM. Has anyone tried the "VIN Write" option under the "Engine" module? I'm thinking this is all it needs as the 14 is already unlocked. Just wondering if anyone has any experience. I've tried searching, no luck Sent from my SM-G965W using Tapatalk
  4. A

    AlfaOBD

    Did we get the tire size change figured out for 2019 trucks? Sent from my SM-G965W using Tapatalk
  5. A

    Alphaobd remote start

    Correct.. all 13+ trucks have the plug but only some (very few in my experience) run to the BCM. On the 09-12, of it has the plug, it's fully wired Sent from my SM-G965W using Tapatalk
  6. A

    AlfaOBD

    So I have the air bag light on because I swapped the seats from a 2017 base (cloth seats) to 2018 power ram seats from a single cab and for some reason they don’t have a weight sensor or seat belt sensor in the new seats so now the air bag light is on. Dealer said some rams don't come with the...
  7. A

    Alphaobd remote start

    Some of the 2500/3500 do have a wire in pin 11 If your positive that you do not have the hood latch connector. What you can do is cut the wire that's in pin 11, add some wire to it and ground it to somewhere simple as that Sent from my SM-G965W using Tapatalk
  8. A

    AlfaOBD Support For 06~12 Rams

    No, only 13+ Sent from my SM-G965W using Tapatalk
  9. A

    Remote start

    Gas.. no. Diesel? They will high idle on their own with factory remote start Sent from my SM-G965W using Tapatalk
  10. A

    Alphaobd remote start

    I've also confirmed 09-12 WIN is capable. Sent from my SM-G965W using Tapatalk
  11. A

    AlfaOBD Support For 06~12 Rams

    Yes, that's it. Set it, than drive it. IF, that's does complete it. Connect to "WCM" under the RF-HUB and "Reset WIN configuration". You'll need your 4 digit code for this. Either go to dealer. Or get it from "Chrysler pin puller". It's 15 tokens to get your PIN number. And first time using...
  12. A

    AlfaOBD

    On the classics.. Does anybody know if the wiring harness is above the headliner? For the trucks that did not come with the overhead console/lighting? Has anybody done the install and activation? Sent from my SM-G965W using Tapatalk
  13. A

    2019 Classic 5.7 died due to cold weather?

    Definitely sounds like a fuel issue. No matter what this is not normal whatsoever. You need a trip to the dealer my friend! They will be able to read internal codes, there will be something there. The engine was cranking [emoji848] fuel, air or spark... My guess would be a fuel problem. Do you...
  14. A

    Alphaobd remote start

    If pin 11 is populated, you're in luck.. So far all single cab trucks have been pre-wired and those with the Alpine system along with a few others I haven't been able to find out the rhythm. If it is populated, all you need to do is put a jumper wire into the hood latch connector that your...
  15. A

    Alphaobd remote start

    You can add a pin into number 11 on connector c1 of the BCM and ground it. That tell you bypass the hood latch. Here in Canada it's a 70-30 split if trucks are pre-wired. ALL single cab trucks are pre-wired. Sent from my SM-G965W using Tapatalk
See more

Latest posts

Members online

Total: 355 (members: 6, guests: 349)
Robots: 1,110

Forum statistics

Threads
195,469
Posts
2,870,596
Members
156,177
Latest member
joeyoliver45

Share this page

Top