-
-
Aatreides reacted to crazykid1994's post in the thread 4" Zone lift with Fox 2.0 coilovers and shocks with
Like.
With a 6” kit 5” would be the lowest you could go -
Aatreides reacted to ChaseH878's post in the thread 4" Zone lift with Fox 2.0 coilovers and shocks with Like.
@RJL1 So can the 6" inch kit with the coilovers put the front at only 5" or can it go down to 4"?
-
Aatreides reacted to [email protected]'s post in the thread 4" Zone lift with Fox 2.0 coilovers and shocks with Like.
so without the preload spacer and running the 2.0 coil overs at the lower setting you would be at 5", you can adjust them up to 7" of...
-
Aatreides reacted to crazykid1994's post in the thread 4" Zone lift with Fox 2.0 coilovers and shocks with Like.
Correct. And actually it’s a 5” strut spacer and 1” preload I think. So you would actually be at 7” lift
-
Aatreides replied to the thread leveling kits and handling.I've got 3'' pucks front and rear right now and I can confirm it rides like shit. Looking at a Zone kit with Fox now to get it riding right.
-
Aatreides replied to the thread 4" Zone lift with Fox 2.0 coilovers and shocks.Would using the 2.0s with a Zone 6'' lift require setting the coilovers to 2'' of lift and adding the 4'' strut spacer on top? So the...
-
Aatreides reacted to ChaseH878's post in the thread 4" Zone lift with Fox 2.0 coilovers and shocks with Like.
Good Day All, I have a 2015 1500 4x4 and I am wanting to put a 4 inch lift on it. I'm pretty set on the 4" inch Zone kit and would like...
-
Aatreides replied to the thread 2017 Laramie on 35s with stock 20s?.Yup. The need for spacers also depends on the upper control arms. I don't recall which, but some upper arms will have clearance issues...
-
Aatreides replied to the thread Hard Tonneau covers with quick/easy tool-less removal?.It’s for a motorcycle, the front tire sadly doesn’t fit under the panel and the fairings interfere with it as well. :( I do indeed have...
-
Aatreides reacted to chopperman1's post in the thread Hard Tonneau covers with quick/easy tool-less removal? with Like.
I have the same cover. Motorcycle or bicycle? If bicycle, couple possible solutions. Put the bike in backwards that way the rear tire...
-
AI currently have the Mopar "tri-fold" tonneau cover (link to cover) which has 4 sections, 3 of which fold and the fore most section...
-
Aatreides replied to the thread Got the 3 inch body lift installed!.Man you guys are lucky. My ******* didn’t check the steering shaft as I raised the body… the lower shaft stuck in the steering assembly...
-
Aatreides replied to the thread Head lights.Pull the grill so you can see the adjusters and mounting hardware while you adjust them. Either the adjustors are not working as they...
-
Aatreides replied to the thread Why the short antennas?.No worries. Yup, makes sense. I’m not expecting to get any reasonable reception with this antenna outside the valley here, but at least...
-
ASorry I didn’t see the question, yes that’s where I grabbed mine from. You’ll notice if you out in the sticks, away from the city, radio...
-
-
Loading…
-
Loading…
Members online
- RodeoRam
- RLJ10X
- johnnyg
- Wyo72
- kdwright5407
- Dieselfitter
- ifrroadguy
- clint440
- spacex
- Dodge trucker
- jhiggins
- NJMOPAR
- 2020PW
- Loudram
- herdfan0710
- ISKRA
- js12278
- ninoshrv
- zogg
- Lilhuey007
- 14hemiexpress
- Toddbigboytruck
- ArturoL3333
- Thomas Caccitolo
- U&A
- Sillygoose
- Grim
- lostaggie00
- Limeybastard
- Heatheroo
- dhay13
- Wbreed
- star_deceiver
- Curt Gobbell
- Looking4Ram
- WadXpress
- Theck4291
- bigdodge
- Webmeester
- KKBB
- OC455
- Nicholas Cove
- 22hemi13
- metalchewy
- jeffawats
- mtofell
- Dirty D
- KalboKalbs
- ZahraL17
- BigWilly