I have confirmed that the random freezing and rebooting has either been resolved with 28.3 update or because my SXM subscription is activated due to the holiday. I’ve read in the last week about several other people experiencing the same freezing/rebooting when their subscription ends. If that’s...
So sorry as I just caught this again. I’m curious if there is something the Customtronix module caused that can be reverted, but not sure how we can pinpoint the location. With me Customtronix module removed and only factory installed equipment I still have the interference lines to this date...
That's what I was afraid of. I firmly believe that somehow adding the Customtronix Enzo premium messed up the backup and cargo cam screens on my uaq because the video inputs worked great before I installed it and when I remove it both cams still have bad interference. I reinstalled my RA4 and...
Sorry for the late replies I'm terrible at that between work and home projects. Yes and no to the additional video input. After figuring out unplugging the harnesses under the seat didn't make any difference I plugged the Customtronix Enzo back in so I can utilize my front camera w/the cargo &...
I don't use the aux just the USB. Do you think the aux is the only thing that could be causing both my radios to randomly reboot?
'16 CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Single Zone ATC
I'm with you on getting tired of taking the dash apart. I'm definitely tired of the issues though. Funny thing is even after removing any and ALL aftermarket wiring harnesses or modules I still get interference but not as bad as I do with the Customtronix installed. I didn't have any lines in...
Unfortunately I'm back to square 1 and the radio still freezes then reboots and the interference is ongoing. [emoji2371][emoji2359]
'16 CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Single Zone ATC
Has anyone experienced their 8.4" randomly becoming completely unresponsive then rebooting on its own? I originally swapped my factory RA3 for my UAQ and had no issues. After running it for awhile I added the Customtronix Enzo & their dual video splitter switch and a front camera on top of my...
Late update but I disconnected the harness under the DS on the right side and once I noticed it didn't make a difference with the lines in both the cargo & front camera I plugged it back in. I haven't had it reboot on me again but still have terrible "interference" lines on both camera...
After pulling the bottom of the armrest apart and looking at the wiring from the hub down to the top of the bottom part of the jump seat I didn't notice any issues and left the camera up while I was moving wiring around to see if anything changed but no luck. Is there another spot under the...
I will start there and if I can't find anything I will look behind the radio. How did you go about repairing it?
'16 CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Single Zone ATC
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.