Recent content by Azmp1

  1. Azmp1

    Heated steering wheel upgrade

    No don’t have the heated seats. Basic manual cloth seats, maybe upgrade in the future if I stumble on a nice deal. The wheel really is in nice shape, especially for what I paid for it. So contemplating if I want to drop another 160 on the steering column, just to get the heated option, I do fine...
  2. Azmp1

    Heated steering wheel upgrade

    Yeah it’s a gamble I agree. I’m quoted $160 shipped for the entire steering column. Wonder what else I can use there ))
  3. Azmp1

    Heated steering wheel upgrade

    Thanks! Got the button there already and just called the junk yard i got the wheel from and they will be sending the enture steering column assembly with the clockspring. I do have Alfa, so should be good there, looks like will just need the harness.
  4. Azmp1

    Heated steering wheel upgrade

    Hi all, so just picked up a leather heated steering with volume controls. See pics. I have a 2014 Express with basic steering wheel that has no volume controls or the heated function. Last year I did an interior upgrade, where as part of it I replaced my center console and also my radio with the...
  5. Azmp1

    AlfaOBD

    Hi all, I have the AlfaoBD soft and the OBDLink MX+ and it works fine on my 2014 for all my needs. The question i have is what do i need for the 2021 MY, which im about to buy. I remember reading that some kind of additional cable (yellow cable??) is required.. can someone confirm please, so i...
  6. Azmp1

    Aftermarker backup camera install issue

    So I bought it was better, but it wasn’t. after doing more research, it looks like it’s the voltage issue on the backup camera power line, as when the truck is on power fluctuates and needs to be stabilized. looks like there is voltage regulator that can be imstalled inline at the camera wire...
  7. Azmp1

    No high beams with auto high beams enabled

    No. thats whats gone away completely. Auto highbeam now work, but pulling the stalk towards me to flash no longer does anything.
  8. Azmp1

    No high beams with auto high beams enabled

    They were definitely working just fine before i changed settings.
  9. Azmp1

    No high beams with auto high beams enabled

    Got it. So here's the update. You're right, auto highbeams DO work, i just had to test it in the dark and be driving - like you said. Didnt realize thats how it is on this truck, as on my other cars, i can still use them, outside of the auto highbeam function. However, what doesnt work, is on...
  10. Azmp1

    No high beams with auto high beams enabled

    Hey there, i have 2014 express originally I had a ra1 with manual mirror (no harness there at all), couple years back, I’ve replaced ra1 with ra2 to get Bluetooth and sourced the mirror with mics, which also happened to have a smartbeam camera, harness I got from dealer and all was plug in...
  11. Azmp1

    No high beams with auto high beams enabled

    Alright folks... unfortunately another issue to be solved. I just enabled auto high beams via Alfa OBD, by following the instructions in the AlfaOBD thread. Unfortunately, my high beams are now gone altogether. Nothing happens when i pull the stalk balk for flashing, or forward for on (except...
  12. Azmp1

    Adding homelink

    It’s 2014. The compass settings are under the settings menu on unconnect. I’d take a picture, but I’ve swapped the android unit back already
  13. Azmp1

    Adding homelink

    @SitKneelBend It worked, as it just needed calibration, as you stated. The only caveat, is you have to put the compass in the calibration mode, via compass settings on uconnect, so for me, since i already had the aftermarket unit in, i had to swap the uniconnect back in, to be able to that, as...
  14. Azmp1

    Adding homelink

    It actually makes sense (aside from the open door haha). I will try, thanks!
  15. Azmp1

    Adding homelink

    So, i have it all set, heading on EVIC is there now as well, but the compass doesnt seem to be functioning correctly. I drove around a bit and just switches between N and NE and not correctly either. I double checked all the setting through Alfa, all look to be set correctly. Did i miss...
See more

Latest posts

Staff online

Members online

... and 15 more.
Total: 1,497 (members: 65, guests: 1,432)
Robots: 1,547

Forum statistics

Threads
195,573
Posts
2,872,010
Members
156,337
Latest member
medicinman2

Share this page

Top