Recent content by bassheadhemi

  1. bassheadhemi

    Blackstone - used oil analysis

    it's in km Sent from my SM-N950W using Tapatalk
  2. bassheadhemi

    Blackstone - used oil analysis

    Sold the truck last weekend, but here's the last results. Sent from my SM-N950W using Tapatalk
  3. bassheadhemi

    I Just Can't Stop

    lol I feel our pain, I'm at 10 now I believe and for me it's always the drone that make me change. I have long tubes headers so that isn't helping to tame the beast and need cold start to not wake up the dead and ideally my neighbor. Tried different size Magnaflow and Borla ProXS, Flowmaster...
  4. bassheadhemi

    Air intake upgrade?

    if your headlights dim with engine off yes second battery will help, but if like me it's while the engine is running, then that's your alternator. Sent from my SM-N950W using Tapatalk
  5. bassheadhemi

    Air intake upgrade?

    How many watts you plan on having to need a second battery, class ab amps? I have 2400w of classd D amps and my single Northstar 94r AGM hold the load just fine. The alt is the issue when pushing the system. Sent from my SM-N950W using Tapatalk
  6. bassheadhemi

    Muffler ?

    If you keep the factory tail pipe and DIY you will need center/offset or offset/offset depending on the muffler size. You will also need a 3" pipe and some 3" clamps. Ideally you should have a hanger welded to the muffler to help support everything. For example the Flowmaster 50 HD...
  7. bassheadhemi

    Heater Not Blowing Hot

    can't it be the blend door? Sent from my SM-N950W using Tapatalk
  8. bassheadhemi

    muffler

    you will need a muffler with 3" inlet and dual 2.25" outlet the Borla Pro XS 400486 is a perfect diy muffler. all you need is the muffler, a 3" extension pipe (around 17"iirc), 2 3" accuseal clamps and 2 2.25" accuseal clamps if you are on a tight budget, you can grind off the weld on the...
  9. bassheadhemi

    PaceSetter Long Tube Headers

    they are plain steel, they will rust in no time depending where you live Sent from my SM-N950W using Tapatalk
  10. bassheadhemi

    ARH Headers leaking

    Well guys, I'm glad to say that you were right! The Remflex gasket and ARH headers are fine on my truck, speed shop couldn't find any leak. I guess the transmission shop never had a car/truck with headers and a quiet exhaust before, but the fact that they blocked the exit to confirm that it was...
  11. bassheadhemi

    Single to Dual Exhaust Help

    To install the dual factory tail pipe you will also need theses on the driver side Isolator 52103718AB Isolator 52103717AB Hanger 52122572AA Bolt 06104390AA Sent from my SM-N950W using Tapatalk
  12. bassheadhemi

    AlfaOBD

    bug fixes only Sent from my SM-N950W using Tapatalk
  13. bassheadhemi

    Roll Up Tonneau Covers vs Foldable/Hard Bed Covers?

    if you live or travel in freezing weather area avoid the Backflip G2 like the plague. I'm on my 3rd cover under warranty and this one will do the same thing by the end of winter. basically water get between the aluminum and foam take makes the panel and when it freeze it cause the panel to...
  14. bassheadhemi

    5-20 or 5-3)

    look at your manual but iirc the recommended grade for the 5.7 when towing is 5w30 Sent from my SM-N950W using Tapatalk
  15. bassheadhemi

    Different muffler

    I believe this kit have the 22" 5x11 body muffler, this is one of the quieter free flowing muffler on the market. The only other free flowing that might tone it down a little more is the Solo Mach82, but you will need to have a shop extend it a little and have the hanger welded. Like my wife...
See more

Latest posts

Staff online

Members online

... and 12 more.
Total: 1,446 (members: 62, guests: 1,384)
Robots: 1,885

Forum statistics

Threads
195,596
Posts
2,872,338
Members
156,402
Latest member
pierogi

Share this page

Top