Recent content by BillIndelicato
-
Alpharex Parking light messages and Non customer service.
Can you elaborate? I just put in a new set of the luxx to replace my g2s and still getting errors- BillIndelicato
- Post #30
- Forum: Exterior
-
No Drivers heat, functioning blend door actuator
I’m having a very annoying but similar issue… I’ve checked all the actuators and it seems the one that switches from floor to defrost isn’t getting a signal from the controller… I’ve flushed the HC and that didn’t help… the only time the motor turns is when I unplug the main harness then plug it...- BillIndelicato
- Post #15
- Forum: General Discussions
-
AlfaOBD
Which pac module? Everything I looked at says will not work with my 14- BillIndelicato
- Post #11,820
- Forum: 4th Gen DIY
-
-
-
Anyone try Modifystreet headlights?
I bought these lights g2 jet black... put them in and cannot get passed the turn signal out on both sides and hyper flash... checked everything that I could with alfaobd but still getting the errors... all lights function as normal... hid kit throughout... but for stock projectors with harness...- BillIndelicato
- Post #1,654
- Forum: Exterior
-
AlfaOBD
Are you doing this all at once or stopping after each selection... shutting down and restarting the procedure after waiting some time in between??? I went in and completely undid everything then re did everything and it took a good 3 hours sitting in my driveway and I still don’t have it showing...- BillIndelicato
- Post #4,818
- Forum: 4th Gen DIY
-
AlfaOBD
Is there a way to reset the bcm so I can just start from scratch?- BillIndelicato
- Post #4,662
- Forum: 4th Gen DIY
-
-
How to install CANBUS License plate bulbs and where to find them for CHEAP!
Do you have a link to these bulbs?- BillIndelicato
- Post #5
- Forum: 4th Gen DIY
-
AlfaOBD
Ok so I’ve been on the road for a few weeks the truck has sat for the most part with a few uses by the family and still no DRL option in the radio... I have officially given up...- BillIndelicato
- Post #4,427
- Forum: 4th Gen DIY
-
AlfaOBD
I give up... I went back and turned everything back to default... retried as per “working” method and still nothing...- BillIndelicato
- Post #3,953
- Forum: 4th Gen DIY
-
AlfaOBD
Between having to buy a new tablet the software and reader I could have just gotten a new radio- BillIndelicato
- Post #3,952
- Forum: 4th Gen DIY
-
-
