-
-
As was mentioned before, enable high intensity discharge headlamps. That will disable the pwm function that is being used and should... -
billyw replied to the thread Morimoto XB LED CAN-BUS Install Info (2015 RAM 1500 Sport with Projector OEM).Maybe if the opportunity presents itself at some point, I'll disconnect the resistors to see what happens. But for this winter, I'm not...
-
billyw replied to the thread Morimoto XB LED CAN-BUS Install Info (2015 RAM 1500 Sport with Projector OEM).When I ordered the Morimoto kit, I specified that it was for a 2015, which causes them to include the resistors. Now having run it for...
-
I've read of a couple of users who successfully used the LED setting too. I'd leave it as is and watch for any flickering or dropouts...
-
billyw replied to the thread Morimoto XB LED Headlights.A couple days ago, I installed Morimoto XBs with resisters and almost immediately experienced the shutoff issue. Since then, I've...
-
As previously mentioned, I've read of more successes using LED replacement bulbs by setting the Headlamps to HID - Yes than LED. See...
-
billyw replied to the thread Morimoto XB LED Headlights.So... What happened? I just did the Morimoto "upgrade" on my 2015, and with the resistors, the lights shut off after about 20 minutes...
-
billyw replied to the thread Morimoto XB LED CAN-BUS Install Info (2015 RAM 1500 Sport with Projector OEM).So, I just installed the Morimotos with resistors on my 2015 Ram and am experiencing the typical issues. They shut off after about 20...
-
-
Loading…
-
Loading…
Members online
- TC
- soapy
- alphonzo
- s_talbert
- ZachG3500
- FarmOffrd
- Martyv3
- MorrissCatry
- augmister
- GTyankee
- OC455
- MoparBrent
- estevega
- hodge-xj
- jws123
- saturnx
- Cmz2800
- Cruzrs
- oicw
- hdog33
- stratman
- RainZeros
- Derwood
- Choicebro
- Docwagon1776
- Dean2
- DampLemonade
- FernieFern24
- rzr6-4
- ToKnowWhere
- AZ MARK
- osprey ram
- Caline
- Baba78
- diymirage
- kad
- Arnold Simmons
- Six Turboed
- pcwizard2600
- Red18ram
- 6speed4.7