Recent content by blabarre

  1. B

    5.7 cam & lifter install and now misfire runs like crap

    Ha i had them at the time. I guess i just overlooked 2 of them
  2. B

    5.7 cam & lifter install and now misfire runs like crap

    My misfire ended up being the exhaust rocker arm on the passenger side wasn’t tightened down enough. Tighted it down and it’s running like a champ
  3. B

    5th gen 1500 REAR BUMPER CONVERSION

    What about the tag lights, were they plug and play? I know the new ones are led, my old ones weren’t.
  4. B

    5th gen 1500 rear bumper on 4th gen

    Buying a chrome 2021 rear bumper that is brand new from an individual this week for 250 dollars. Has cutouts for exhaust and sensors! Looking forward to using this write up to put it on my 2011 ram!
  5. B

    Lifter tick after cam and lifter replacement

    You checked the exhaust manifolds? Sent from my iPhone using Tapatalk
  6. B

    Another spark plug thread (copper vs iridium)

    From everything I’ve read, yours come with the iridium plugs and it’s 100k interval. Sent from my iPhone using Tapatalk
  7. B

    Another spark plug thread (copper vs iridium)

    Do you have a programmer? Is that how you run without mds? Also, would I need to not run mds in order to run the iridium plugs? Sent from my iPhone using Tapatalk
  8. B

    Another spark plug thread (copper vs iridium)

    That’s awesome. Did you have to gap them at all? And didn’t change coils? Sent from my iPhone using Tapatalk
  9. B

    Another spark plug thread (copper vs iridium)

    I’ve been reading the same but I’ve seen where some people with 2011s have run the ngk iridium ix without changing the coils and they said they had no issues. Was hoping to see if others had experience with this. Sent from my iPhone using Tapatalk
  10. B

    Another spark plug thread (copper vs iridium)

    So I have a 2011 5.7 hemi with 113k miles. I spent several hours last night researching spark plugs through the various threads out there. Didn’t really see anything recent about this so I thought I’d post this. I have been reading about the 2009-2013 trucks require the copper plugs because in...
  11. B

    Hemi Tick or exhaust manifold

    I have mcgaughys 2” drop coils on the rear so mine sits close to level Sent from my iPhone using Tapatalk
  12. B

    Hemi Tick or exhaust manifold

    No I used 7 qts. I always use 7 qts when I change it. No clue as to why it was low. I never got any check engine/low oil lights. I have a good friend that has a 2015 ram and he said that his is usually a qrt or so low every time he changes his as well and he doesn’t have any leaks either...
  13. B

    Hemi Tick or exhaust manifold

    Guys! I am pleased to report that doing an oil change with 5w30 solved the issue. She is as quiet as a mouse this morning at startup! Definitely wasn’t exhaust leak. I did notice I was about 2 quarts low after changing. No visible leaks and doesn’t appear to be burning [emoji2369] Sent from my...
  14. B

    Hemi Tick or exhaust manifold

    I’ve actually read of some others that mentioned what you are saying. Also about the oil filter drain back valve. I guess my first step would be to change the oil and filter. Sent from my iPhone using Tapatalk
  15. B

    Hemi Tick or exhaust manifold

    I used copper gasket maker for flange to y pipe and on the felpro manifold gaskets as well to give a little extra assurance. That’s what has me baffled Sent from my iPhone using Tapatalk
See more

Latest posts

Members online

... and 8 more.
Total: 1,150 (members: 58, guests: 1,092)
Robots: 1,693

Forum statistics

Threads
195,604
Posts
2,872,417
Members
156,415
Latest member
prowess9292

Share this page

Top