-
-
Bbonnyjliss reacted to Sherman Bird's post in the thread Check engine light for cats with long tube headers with
Like.
I love it! -
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.i just ended up buying a set of amazon headlights still fogging up really bad. oh well here is the alignment sheet
-
-
Bbonnyjliss replied to the thread Check engine light for cats with long tube headers.spark plug anti foulers work, they are really cheap
-
Bbonnyjliss reacted to Brandon-w's post in the thread Check engine light for cats with long tube headers with Like.
Just put spark arrestors in the rear O2 holes and then thread your O2 sensors in. It pulls the sensors directly out of the exhaust...
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.yah i was just thinking about doing something like that. this is how it is now, i took it off again and dried it out, and tried to seal...
-
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.headlight won't stop fogging up
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.headlight still getting condensation in it, i took it off and i noticed that these housings didn't have vents, so i dried it out again...
-
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.they didnt charge me, they were able to adjust it to get it to drive straight, it drives pretty good, its not like 100% brand new truck...
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.yeah i ended up just taking it to them hopefully they won't charge me for two alignments. it drove pretty straight, but the wheel cocked...
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.i used some big vice grips to get a hold of the inner tie rod. i cut a new outer and had to cut the inner both about 3/8 and now there...
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.well i just bought two new outer tie rod ends and cut them both 3/8 and going to take it to schwabs and see if they will align it again...
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.I can't loosen the inner tie rod it and the outer just slip on the wrenches
-
Bbonnyjliss replied to the thread 2016 ram 1500 rcsb build thread.It only needs to come a little bit more, not really that much more it's really close
-
Loading…
-
Loading…
