Recent content by Brew99

  1. B

    AlfaOBD

    Works fine on Win 10 or 11
  2. B

    AlfaOBD

    I've got a FOB from my 2016 RAM that isn't recognized by the truck for ignition (lock/unlock works fine). It was intermittent over the last month, and finally died. Changed battery, but still "duff". I've programmed a new FOB via AlfaOBD, so that's great. Thought I'd try and re-program the...
  3. B

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I have a 2016 Canadian 8.4A (RA3) radio on 17.43.01. Is there a different 18.45.01 update file for Canadian radios, or is it the same one as in post #3 Also, I'm thinking of getting the nav activated. Would you suggest activating first before updating firmware to 18.45.01, or do the update...
  4. B

    Tire size change alfaOBD

    I believe the dev. added the PIN reading function in the android app v2.2.0, so prior to that people needed to get it from the dealer or use another android app to get it.. I know you need the PIN when resetting the RF hub (i.e. when changing TPMS)
  5. B

    How to add remote start to 2017 Ram

    Are you certain that the pin code the dealer is giving you is for the RF HUB? It is different than the key code one. Another option is to try the Chrysler Pin Puller app from the Google play store (if you have an android phone/tablet). I used this app, got the code, and it worked great with...
  6. B

    How to add remote start to 2017 Ram

    I think I only disconnected one right beside it, which gave me a little more slack. Was able to lie on my back with feet on the ground and do it. Not much room, and somewhat uncomfortable but doesn’t take too long
  7. B

    How to add remote start to 2017 Ram

    Your observations are basically correct. It is a little easier if you remove the panel below the steering wheel (not sure what that's called), but as you have observed, the wires are bundled together, and don't offer much slack. I fought my way through it, and after figuring out how the...
  8. B

    AlfaOBD

    I didn't try it, as I assumed many others would have already reported on that if it worked. I just went straight with using the Android app as mentioned in this thread I found a way to receive your own PIN CODE without the dealer :) | DODGE RAM FORUM - Dodge Truck Forums Worked on my 2016
  9. B

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    Says "file not found" when I try the link
  10. B

    Enable “Audio” Premium Cluster + Engine/Idle Hours

    I’m not 100% certain but I don’t think it is suppose to show any album artwork or information in the cluster.
  11. B

    2016 8.4 enable mute at start up?

    Is there anyway to have the 8.4AN start up in a muted mode? Can AlfaOBD change it? I can’t stand how even if you have it muted when you turn off the truck, when you start it again it is unmuted.
  12. B

    How to add remote start to 2017 Ram

    Ok thanks. Figured it out. It says unavailable when shipping to my Canada address, but if I changed it to my mother-in-law’s in the US, it’s $10. Of course not available on Amazon Canada
  13. B

    How to add remote start to 2017 Ram

    Both currently unavailable it says, and no eta
  14. B

    How to add remote start to 2017 Ram

    Where are you guys finding the key fob overlays? I’ve looked on Amazon and eBay and all I see are new complete fobs
  15. B

    I found a way to receive your own PIN CODE without the dealer :)

    Anyone know if this Chrysler pin puller app works with the Bbfly OBD unit? Have heard that this unit works great with alfaOBD which is a bonus Update: the bbfly-BB77102 worked great with the Pin Puller app. and AlfaOBD. It is also 1/3rd the cost of the MX+
See more

Latest posts

Members online

... and 24 more.
Total: 1,364 (members: 74, guests: 1,290)
Robots: 1,924

Forum statistics

Threads
195,613
Posts
2,872,563
Members
156,437
Latest member
Ryanbuddy1

Share this page

Top