-
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with
Like.
I've never worried to much about the missing heat deflectors. I'd rather have a gasket that allows for some expansion and contraction... -
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.your using these Remflex gaskets, no issue with them not having that built in heat deflector like the OEM ones? I’m going to order...
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with Like.
WD40 isn't a penetrating oil,it's a Water Dispersant formula that the guy that came up with it, developed on his 40th try,hense the name...
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.Thank you Rick, I appreciate you sharing all this knowledge, I just happen to have both in my shop
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with Love.
Don't use WD40,mix up some cheap or even used automatic transmission fluid and acetone in about a 50/50 ratio and use a spray bottle to...
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.Do you think there’s any benefit to soaking those exhaust manifold studs repeatedly over a day or 2 with WD-40 before going at them with...
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with Like.
Pretty well every torque sequence is just an ever widening circle starting in the middle. If you don't have a torque sequence,start in...
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.I think when I was talking with the machine shop today he mentioned that they used to use graphite gaskets for the heads and that they...
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.Any benefit of soaking those manifold bolts with WD-40 every couple of hours for a few days before going at them with the impact?
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.Ok, so get these remflexes then. After I posted I think I seen that the price in Amazon was for both gaskets so that’s just about the...
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with Like.
The Remflex gaskets are like nothing you've ever seen,they're a thick graphite gasket,that allows for some expansion and contraction...
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with Like.
Damn i just took a look at you tube and there's a pile of video's on DIY head resurfacing,lol. https://www.youtube.com/watch?v=9KauqWsaNsQ
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.I can’t remember if that included a cleaning or not or if it included the magnaflux job. I know it does include to resurface the head...
-
BurtShaver reacted to Wild one's post in the thread Noob needs help 6.4L possible lifter and cam with Like.
That's not a bad price for resurfacing ,did he say if that also included a cleaning and magnaflux job to check for cracks. Use Remflex...
-
BurtShaver replied to the thread Noob needs help 6.4L possible lifter and cam.Update, I took that head with the scratch to a Performance shop locally, I won’t mention the full name just in case someday this thread...
-
-
Loading…
-
Loading…
