c713
- Posts
- 13
- Reaction score
- 21
Latest activity Postings About
-
-
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.Hey. So I did use the Mopar gasket, was very careful installing and right torque specs. All is good. No I have a complete intake with... -
c713 reacted to 1979PowerWagon360's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with
Like.
Yes definitely thank you for following up! I don't know if the blame is on the gasket or the install but I do know Felpro gaskets... -
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.You're welcome. Thanks again to everyone!
-
Thank you for the update. Alot of times people never post the end result.
-
c713 reacted to crackerjack1957's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
Might want to check that valve cover flange with a straight edge.
-
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.Hey everyone. I'm back. So wanted to say thanks to everyone for all the help. It's been a hair pulling experience and at least I have...
-
At this point, might be the best choice. Wonder if you have any oil in the plug wells.
-
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.Yes I see that and probably a good idea. I will have to just to make sure. I will update tomorrow on the progress.
-
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.Hey so here I am again. So I thank all those who have helped. I decided to take the valve cover off and I do believe my son and I have...
-
-
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.So you think use Mopar gaskets for the valve covers?
-
c713 replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.Bump below.. sorry
-
c713 reacted to RedSRT4Me's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
Being that changing the gaskets is a pain I'll take the advise and eat the $10 bucks the fel pro cost. Doing it once with proper...
-
Clean all the bolts, chase the thread bores, use a GOOD torque wrench and follow the torque sequence. I really hope you used Blue Loc Tite!
-
c713 reacted to Timsdually's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
Use only Mopar gaskets. Felpro sucks IMO. They always leaked for anybody I knew who used them.
-
Are you absolutely sure that one of the MDS solenoids or the oil control valve isn't leaking? Oil is pressurized at those points and...
-
-
Loading…
-
Loading…
