-
-
If the OP has a Partsource nearby, they likely have a battery tester behind the counter that he can borrow to test the battery /... -
Canadianbreed reacted to Marshall's post in the thread Can a bad battery cause this error? with
Like.
If the truck is running, that's a good number, shows the alt. is working as it should be. -
Canadianbreed reacted to Wild one's post in the thread Can a bad battery cause this error? with Like.
They'll probably have a digital tester,and they aren't really a load tester. Whats wrong with buying one,so you have it on hand,it's a...
-
Canadianbreed reacted to GTyankee's post in the thread Can a bad battery cause this error? with Like.
digital battery testers are not as dependable as Analog battery testers. someday you will understand that
-
Canadianbreed reacted to Timsdually's post in the thread Can a bad battery cause this error? with Like.
Some things take a few start and stop cycles to come back. When I changed the batteries in my dually, it took about 4 cycles for all the...
-
Canadianbreed replied to the thread Can a bad battery cause this error?.Hey fellas, thanks for all the help on diagnosing the problem. I drove the truck around the block with the errors still displayed to see...
-
Canadianbreed reacted to Wild one's post in the thread Can a bad battery cause this error? with Like.
Drop by your local Canadian Tire and pick up one of these old style testers,and test your battery...
-
check first fuse and reset all errors by alfaobd or something similar, disconnect neutral cable from battery for 15mins
-
It also could be just an sensor
-
In my opinion something get too much voltage… so first check fuses/cables that going under driver side
-
mostly all American cars cars had nasty wiring
-
Canadianbreed reacted to Wild one's post in the thread Can a bad battery cause this error? with Like.
Just buy the battery tester i gave you the link to,it's still one of the best battery testers you can have,the newer digital testers...
-
Canadianbreed replied to the thread Can a bad battery cause this error?.I had a multimeter sitting around that read 14.50V yesterday and then when I plugged in my obdlink mx+ to possibly try and reset the...
-
Service electronic stability control error, either from the dead battery I had this morning or from when I was trying to piggyback fuses...
-
-
This will just be a thread on anything I do to the truck, here I'll list what I've done to the truck along with future plans! Not sure...
-
-
Loading…
-
Loading…
