Recent content by Carl Ram

  1. C

    No reverse lights

    If the solenoid block on the transmission is bad, could that be the problem and can that be tested? Again.... THANKS MUCH!
  2. C

    No reverse lights

    Ok... That’s one thing not in my toolbox. An AlfaOBD. Does a Dodge dealer have that in their service dept.?
  3. C

    No reverse lights

    But there is no power coming out of TIPM for the reverse light wire
  4. C

    No reverse lights

    Ok guys... I took the reverse bulbs out and tried the same test. With jumping a 12 volt tester with one side on positive and the other in the reverse light wire coming off the bottom of the TIPM. The test light did NOT go on. Again no power coming out of the TIPM on that wire. And fuse is not...
  5. C

    No reverse lights

    Ok... So then if I would take out the reverse light bulbs and do that same test with the 12 volt tester, the test light shouldn’t go on. Is that correct? There is a fuse for the b/u lights but not blown. Thanks for all the input. I need all the help I can get!!!!
  6. C

    No reverse lights

    Ok! Did some more testing. I tracked the reverse lights wire to the bottom of the TIPM. No power coming out. So I tried jumping a 12 volt tester from the positive to that wire. The light came on. So that would tell me that wire is grounded some where. Correct? Now if one of those plugs in the...
  7. C

    No reverse lights

    And shift on the column. I talked with the service guy and he said there is no selectors in the column
  8. C

    No reverse lights

    Yes bulbs are good. Tranny was not removed. 2012 2500 standard cab
  9. C

    No reverse lights

    I recently had the valve body replaced. Now I noticed I have no reverse lights. Is there a plug on the valve body for the reverse lights?

Members online

Forum statistics

Threads
195,583
Posts
2,872,129
Members
156,364
Latest member
austmurr
Top