C
Clebreton
- Posts
- 20
- Reaction score
- 10
Latest activity Postings About
-
-
CClebreton replied to the thread Driveline suspension issue.Well figured it out. Realized I didn’t put the trans mount in so did that and the wheel hop was 75% gone! Replaced rear control arms and...
-
CClebreton replied to the thread Driveline suspension issue.Would that cause a drag then a wheel hop at 10km tho according to the shops I took it to they say no Need to find an actual good shop...
-
CClebreton replied to the thread Driveline suspension issue.This is very true I replace only 1 Only way I know how to check those is open the bleeder line and see if it squirts out rather then...
-
CLets take a step back. Are you sure it's driveline related? Have you checked the bushings in the rear arms? They tend to get loose and...
-
COne thing I didn't see is brake hoses. They could fail allowing the caliper to stay "on".
-
CClebreton replied to the thread Driveline suspension issue.Yeah the rear control arm bushings and track bar is shot that’s what I thought was causing it in the first place but all 3 shops said no...
-
CClebreton replied to the thread Driveline suspension issue.yeah fair enough you all callipers and rotors/pas replaced. Still doing it seams a bit better tho
-
CClebreton replied to the thread Driveline suspension issue.The thing is it went to 3 different shops lol and this is everything they have told me what was causing me the issue
-
CClebreton replied to the thread Driveline suspension issue.Park break was shot so replace the cable and shoes. Doing trans mount and engine mounts once they come in, it does not do it when I back...
-
CClebreton replied to the thread Driveline suspension issue.Replace rear parking shoes and calipers rotors and pads today bled the breaks and still does it.
-
CClebreton replied to the thread Driveline suspension issue.im now starting to think it’s my engine mounts they are completely shot and would make sense to when the slightest amount of loud it...
-
CClebreton replied to the thread Driveline suspension issue.Ok so I did all this on top I replaced Upper control/ ball joints arms both sides Lower ball joints both side and tie rods sway bar...
-
CClebreton replied to the thread Driveline suspension issue.Got around to getting the rear drive shaft on took it for a drive in 4x4 still did it Took the front drive shaft off and it started to...
-
CClebreton replied to the thread Driveline suspension issue.Ok so finally got my code reader to work with my truck ♂️ I’m getting some transmission fault codes P0731 Gear 1 Incorrect Ratio P0732...
-
CClebreton replied to the thread Driveline suspension issue.This will help determine where it’s coming from?
-
-
Loading…
-
Loading…
Members online
- mullet6577
- WSix
- rojpon74
- Papa Red
- Daviddnv
- Completelymobile
- clifford15
- clinford
- Curmudgeon
- MorrissCatry
- turkeybird56
- kyuho
- PA Ram
- DURASPANK
- Haulin Arse
- KenR 955
- Sean McGillicuddy
- Yardbird
- Robeffy
- stenerson
- crackerjack1957
- 09SilverRam
- Dean2
- donner
- Dredger
- Ramfanski
- nighthawk335
- kyguylal
- Leomachus
- Sillygoose
- 1979 300
- Tuggle
- RigRunner
- TRK_GANG74
- ddempsey
- qjwright
- Brad88888
- stevieb92
- Peeps1325
- kad
- PolarisCobra
- runamuck
- DAK2