C
crash
- Posts
- 91
- Reaction score
- 33
Latest activity Postings About
-
-
Ccrash replied to the thread TRX Shifter into a 4th gen truck?.I've now been able to source the pin layouts for the trx console harness from https://connectorrepairkit.mopar.com/ still having...
-
-
Ccrash replied to the thread TRX Shifter into a 4th gen truck?.I've been doing a lot of searching and see that any threads on this have fizzled out with no follow-up. I pickled up a TRX console...
-
CGot it to fit with some mild cutting of the front section it bolted right up.
-
CWorks... Had to take out vent pipe underneath console Had to trim bottom on both sides for hump on floor Used a switched 12v and ground...
-
C5th gen limited interior swap
-
CFigure anything out yet? My Gen 5 seats will be here Monday and I’m gonna start that adventure. I’ll try to document it as best I can
-
Ccrash replied to the thread 2019 Classic Build Thread.fantastic work GB55!! I found a 5th gen GT console complete (with wireless charging/media hub usb ports etc) yesterday. I want to swap...
-
CI have everything I need now. Just waiting for a warmer day. I've taken and extra step and wired up some extra connectors so that I can...
-
CThanks. Needs a little more work on the bottom part of the bezel to make the lines look cleaner. Angle grinder with a 60 grit flap...
-
CConsole is bolted up (no wires yet other than front USB). Gen 4 console bezel relieved to fit. Test fit of the side panels.
-
CCenter console front mount. Found a couple minutes of free time this morning. Gen 5 console wasn't quite lining up with mounting...
-
Cnot fully in yet but we are getting there....... Gen 4 front bracket and full length console Gen 5 front bracket are just different...
-
Ccrash reacted to GB55's post in the thread Replacing dial shift in a Ram Rebel with the GT or TRX console shifter with
Like.
Were you ever able to build a permanent harness? I'm currently working on building a harness for my swap. I have a spare connector to... -
Ccrash reacted to fraleywp's post in the thread Replacing dial shift in a Ram Rebel with the GT or TRX console shifter with Like.
I have a 2023 BH. I swapped the seats and console from a TRX this week. The wiring harness from the truck and the wiring harness on the...
-
Ccrash reacted to fraleywp's post in the thread Replacing dial shift in a Ram Rebel with the GT or TRX console shifter with Like.
More confirmation that this is possible by repinning the body to console harness
-
-
Loading…
-
Loading…
Members online
- Fritter
- sdeeter19555
- chuckster123
- DanAR
- Mojo88
- HarryS
- Greeco
- WSix
- olyelr
- Farmer Fran
- Shutterbug57
- 2016 2500
- Atl-atl
- miketx
- buckeyexx
- fgrammens3
- Dean2
- Bmags
- Biker
- Mardye
- Hemi drifter
- Rambolt
- bad_karma101
- mboymopar
- corneileous
- Thonaseragirl
- datsmer53
- Rob_R
- Daw14
- Keith1
- BenWade
- TC
- Jas34
- Mike R
- Wild one
- whtmontie
- GeauxinUp
- RamDiver
- joshrdez91
- Slinge
- ToxicFire
- John Jensen
- JohnCA
- Travis8352