CunningStunt
- Posts
- 182
- Reaction score
- 107
Latest activity Postings About
-
-
CunningStunt replied to the thread Heads.With the first few replies I was easily able to identify the EGR hole and the Power Steering bolt holes to determine correct side. I am... -
CunningStunt replied to the thread Issues with ignition coils.Also, check all your grounds on the engine/heads
-
CunningStunt replied to the thread Issues with ignition coils.On second thought, who built the motor? This sounds like timing...the fact that almost all even cylinders are all misfiring...
-
CunningStunt replied to the thread Issues with ignition coils.Very bizarre...I would check to make sure fuel injectors are properly seated...if that ain't it, I would check electrical system and...
-
CunningStunt replied to the thread Hemi tick repair.Maybe they just wanna pull the heads cus they actually suspect its lifter failure?
-
So, got my heads back, they look brand new! Kind of a stupid question and I havnt looked in my manual yet, but they took my manifolds...
-
CunningStunt replied to the thread Waterpump & Gaskets.When I looked up Mopar head gaskets they were 80 per side. I missed this, I reckon. Anyways, I had my heads cleaned, cylinder 5 was...
-
Anyone have recommendations/experience for non OEM gasket Set(Heads, Valve Covers, Timing) and a waterpump from Rockauto? Finally...
-
CunningStunt replied to the thread Johnson Lifter installation question.How those JOhnson lifters working out?
-
CunningStunt replied to the thread Well, half the camshaft battle....My dad worked for Verizon FiOS before retiring, they used GMs in the fleet and his mechanic buddy told him that they're having same...
-
CunningStunt replied to the thread Well, half the camshaft battle....Wanna hear something funny? My dad bought a 15 ram 1500 quad the year after I bought mine in '16, almost identical to mine. His lifter...
-
CunningStunt replied to the thread Well, half the camshaft battle....Th I understand, but this ain't a warranty repair. Wish it were. There could be ten dollars in quarters worth of metal in this thing...
-
CunningStunt replied to the thread Well, half the camshaft battle....What bad information? Head bolts on these are not TTY fasteners and can therefore be reused if not stretched or specified in the...
-
CunningStunt replied to the thread Well, half the camshaft battle....As far as I know, the head bolts on the hemi heads are not stretch bolts. If I recall these are torqued twice up to 40ft lbs then 90deg...
-
CunningStunt replied to the thread Well, half the camshaft battle....I agree. T + angle can normally reuse fasteners, TTY can not. Our vehicles heads are T+A
-
-
Loading…
-
Loading…
Members online
- quickster2
- stevenP
- Franks
- larrygaither
- 2500cummins
- NCPowerwagon
- NickM757
- jawzs2
- Mfmiller
- Huffdaddy1
- 14 Lonestar
- David H
- JA Ramy
- Dan Jacopino
- Grim
- rick16706
- Atcer2018
- RC Turner
- czervika
- ColesRAM
- RamElectricalRet
- maxx442
- MCas86
- 4xdad
- RamBat23
- odinjunior
- barbosa
- theamcguy
- grerob
- Docwagon1776
- Cesar1226
- HAL9001
- BridgeEngr
- jabartram
- Dano80bu
- pacofortacos
- WASzuRAUCHEN
- pricey59
- Downzero
- tkabrick
- vance
- dajain
- icetraxx