Recent content by danediz
-
D
AMP Power Steps for 2500 Diesel Installation
No issue with the bolts being long enough to clear the washers? -
D
AMP Power Steps for 2500 Diesel Installation
I've looked at these. Unfortunately they arent hidden as well and their logo is way too large. I have enough issue with the AMP logo when the boards are deployed. -
D
AMP Power Steps for 2500 Diesel Installation
This is where I am confused. Don't I have to use the single rivot and install the "riv nuts" prior to putting on the hinge arms? You also say loosen the bolts. There are two bolts that face the outside and two bolts (installed in the riv nuts) that face the inside. Which ones do I loosesn? -
D
AMP Power Steps for 2500 Diesel Installation
I want to pull the trigger on these but keep hearing about the dreaded pinch weld issues. It seems like walking/bouncing on the steps cures most of the issues if done correctly. I see conflicting information on when exactly in the process I need to do this. The instructions mention when to do... -
D
Height of Tail Pipe on 2022 Ram 2500 Cummins
had my wife do a side by side. mine look identical to yours. as far as the measurements… who knows.- danediz
- Post #11
- Forum: Heavy Duty
-
D
Height of Tail Pipe on 2022 Ram 2500 Cummins
I'll also note I have a full tank and my truck has the 5th wheel and goose neck prep.- danediz
- Post #9
- Forum: Heavy Duty
-
D
Rear Cargo View Camera
I posted this in another thread. My 2022 Laramie 2500 did not come with the rear cargo view camera. This is a nice option during build for only $345. I can find the oem brake light with the camera for around that price. My question is whether it will plug and play if I swap parts and the...- danediz
- Thread
- Replies: 8
- Forum: Heavy Duty
-
D
Height of Tail Pipe on 2022 Ram 2500 Cummins
Attached are measurements of my truck and some other pics. I have the 285/60r/20 firestone TransForce at tires. I have a Laramie Night Edition. NO air suspension. I find it hard to think my pipe is sitting over an inch lower. But this is why I was checking on here. Welds look good where the...- danediz
- Post #7
- Forum: Heavy Duty
-
D
Height of Tail Pipe on 2022 Ram 2500 Cummins
thank you. ill try and replicate that. do you have the rear air suspension?- danediz
- Post #5
- Forum: Heavy Duty
-
D
Height of Tail Pipe on 2022 Ram 2500 Cummins
Can you send a pic? I find it hard to believe mine moved an inch. Of course the measurement may vary across trucks- danediz
- Post #3
- Forum: Heavy Duty
-
D
Height of Tail Pipe on 2022 Ram 2500 Cummins
Was unloading some tires and one bounced and hit my tailpipe pretty hard. I dont think it hit hard enough to bend anything but now I am noticing it looks like its lower. This might be in my head. Bottom of pipe tip is about 14" off ground. I know the previous gen the pipe was more horizontal to...- danediz
- Thread
- Replies: 13
- Forum: Heavy Duty
-
D
Do the Limiteds sit lower than the Laramie etc?
Thanks for the replies! Of course Ram's website says both are 80.2" tall but the added options would add weight so that makes sense. Negligible I am sure. The 2500 power wagon looks to be a whopping 1" taller.- danediz
- Post #7
- Forum: Heavy Duty
-
D
2022 on it's way
mine too! one tire was almost 90. i put them down to 70 and much better. should they be even lower? inside sticker says 65. i figured that was lowest ud want.- danediz
- Post #7
- Forum: Heavy Duty
-
D
Do the Limiteds sit lower than the Laramie etc?
Have been watching videos of 2500 Limited. One video, the guy mentioned that the Limiteds sit lower than other models. Is that correct? Or was he comparing to a rear air suspension model? Also, does the off-road package have any effect on how high the truck sits? Thanks in advance!- danediz
- Thread
- Replies: 7
- Forum: Heavy Duty
-
D
LineX bedliner with 5th wheel prep covers/trim pieces
I did some research on some other forums/trucks. Sounds like a common issue. Supposedly as the LineX cures, its easier to shut and does not get hung up as bad. Other solutions are to trim the rubber stoppers slightly. Overall very happy with the liner. Just wish my truck had the factory running...- danediz
- Post #8
- Forum: Heavy Duty
