Recent content by DavidRussell

  1. DavidRussell

    Another Bilstein 5100 question

    I've got mine set at 2.5 and put a 1" lift in back. I need a slight rake for medium weight towing. Love it this way. Bilsteins in the rear were worth it. Super easy to put on. Even shock wear idk. Felt the difference towing. Feels more like a truck less like a cadi
  2. DavidRussell

    4th Gen 1500. AC problem. Starting on high blows soft. Start low and get to high slowly it blows fine.

    If I remember right that is about worst case senerio cause it involves taking the entire dash apart doesn't it?
  3. DavidRussell

    4th Gen 1500. AC problem. Starting on high blows soft. Start low and get to high slowly it blows fine.

    Basically for the longest I would remote start with my AC already on high. Recently I'd get in after that and my AC would blow super soft on high. Turn it off then on a few times. Didn't do a thing. When I remote start my truck with the AC set to 1. I get in then one at a time get up to max...
  4. DavidRussell

    2017 Ram 1500. Bilstein 5100 struts lifting front 2.5" and 1" rear spacer. Alignment/ UCA/ New tire concern

    So my 2017 Ram 1500 has Bilstein 5100's in front adjusted to be 2.5" lift. Also has 1" spacer in the rear so I still have a slight rake. In the front I didn't replace anything besides the struts. UCAs are stock. Everything aligned pretty good but the angle is maxed out. I am worried new tires...
  5. DavidRussell

    AlfaOBD

    That's exactly what I got. The innovated HID and Hikari LEDs for my highs. Okay this sounds like it should he fairly easy. When changing the turn signals and park lights to LED does alfaobd set front and back separately? Sent from my SM-G973U1 using Tapatalk
  6. DavidRussell

    AlfaOBD

    When you set the DRL to optional on High beam how do the DRL's turn on? I am not even sure if I am going to need to use a fuse tap or if they turn on with a certain setting. I got the Alpharex with sequential and DRL on bottom and top. Does Alphaobd give the option for HID? or to run HID do I...
  7. DavidRussell

    AlfaOBD

    Would you mind telling me all you had to change in alfaobd?? I am putting in AlphaRex headlights tomorrow with HID low and LED high. And it has upper and lower DRL. I have never used alfaobd and I really have no clue what changes I need to make to get this working correctly. Can someone help...
  8. DavidRussell

    UConnect update

    Hey try using a different tool to format to fat32. Windows is horrible at it. Sent from my SM-G973U1 using Tapatalk
  9. DavidRussell

    AlfaOBD

    Is there a specific option for HID or should I just select LED for HID? That may be a stupid question
  10. DavidRussell

    AlfaOBD

    Is it difficult to connect? Pretty straight forward? I am only going to be changing the light settings to LED and turning on DRL following the writeups here. At some point I'm curious about the remote star but that will be down the road.
  11. DavidRussell

    AlfaOBD

    I am about to get alfaOBD as a new user to use LED lights and set up DRL's. To connect to alfaobd does my phone have to be rooted? I am already connected to MX+ but not alfaobd yet. I haven't bought it.
  12. DavidRussell

    5" Uconnect/6 speaker oem. Amp recommendations?

    So I have a 5" uconnect that I want to connect to an Amp. I am looking for something kind of low maintenance that will fit behind the deck if possible. Finding a 6 channel amp is a bit difficult. I have the 6 speaker setup in my 1500. Does anyone know of a 6 channel amp that will fit behind my...
  13. DavidRussell

    How To DIY Fold Flat Floor

    Hey I sent you a message with my email address. Hope you still get on here once in awhile!! Thank you
  14. DavidRussell

    2017 Ram 1500 Front and Rear Bilstein 5100 Install with Rear 1" Spacer. WHATS NEEDED?

    Ive got front and rear bilstein 5100s. PN: BIL24-187367 and PN: BIL24-187374 Also have Daystar 1" Rear coil spacer. PN: KC09116BK Up front. I can use the Bilstein with it being set to 2.1" lift with the stock coil. Nothing else needed? I am not setting 2.8" to avoid replacing the upper...
  15. DavidRussell

    Rear Spacer Suggestions for Bilstein 5100 x4 Please

    Are you positive they will fit? They seem to be advertised for Chevy GMC. Can't seem to find reviews from RAM owners.
See more

Latest posts

Members online

... and 9 more.
Total: 1,073 (members: 59, guests: 1,014)
Robots: 1,115

Forum statistics

Threads
195,393
Posts
2,869,656
Members
156,054
Latest member
dionmtz

Share this page

Top