Dusty
- Posts
- 1,688
- Reaction score
- 2,087
Latest activity Postings About
-
-
Dusty replied to the thread Parasitic Drain.Of course my automotive training occurred when vehicles still had points and a condenser (capacitor), and I've used the voltage drop... -
Dusty replied to the thread Parasitic Drain.The 8026 is a true RMS meter. they are nice. I cannot say I've ever seen a true RMS meter in the hands of an auto tech., at least the...
-
Boss and Ram are correct. It can be done that way. It is an alternative to measuring Milliamps or Amps on the negative post and pulling...
-
Dusty replied to the thread Parasitic Drain.Excuse me but I am not opposed to learning. Did you read my previous post? I accept the process as valid. I'm not questioning electron...
-
One might think water has zero resistance, but everything has a defined resistive value, including water and air. Maybe, everything but...
-
Dusty replied to the thread Parasitic Drain.That's true over a length of wire of some distance, but on the same wire a measurement of very short distance (ie: 1 inch) is going to...
-
Dusty replied to the thread Parasitic Drain.Interesting. Well, I've learned something new. Then this type of fuse must have a resistive value. I can tell you that this type is...
-
Dusty replied to the thread Parasitic Drain.Maybe I'm misunderstanding what you wrote, but you can't really measure a voltage drop across a fuse. A fuse is not a resistor, it is a...
-
Dusty replied to the thread Exhaust Manifold Question.. I know (Arizona).You know, some years Chevy small blocks actually used no gasket at all and used a very low torque on the exhaust manifolds. There were...
-
Dusty reacted to Wild one's post in the thread Exhaust Manifold Question.. I know (Arizona) with
Like.
Check out Remflex gaskets,they have the ability to handle expansion and contraction,as they're a thicker graphite gasket. For a late... -
Dusty replied to the thread Exhaust Manifold Question.. I know (Arizona).Part of the problem is shorter bolts used on the newer designed exhaust manifolds not having enough length for proper flexing. That...
-
Dusty reacted to Wild one's post in the thread Exhaust Manifold Question.. I know (Arizona) with Like.
If you work from home and can afford to have the truck down for a day or 2,why not do them yourself. What a shop will charge you,would...
-
Dusty replied to the thread 2019 Ram 1500 Starter Failure at 98k miles.That's what Red Green would do!! Regards, Dusty 2019 Ram 1500 Billet Silver Laramie Quad Cab 2WD, 5.7 Hemi, 8HP75, 3.21 axle, 33-gallon...
-
Dusty replied to the thread 2015 ZF8 transmission, new pan.. thoughts? (Pic heavy).I can't comment about fitment, but based on the labeling I'm suspicious it's a knock-off. Regards, Dusty 2019 Ram 1500 Billet Silver...
-
Dusty replied to the thread Ram Confirms 25 New Models in 18 Months.Good point. I will say that a friend of mine had been looking for a truck since last year but was put off by pricing. Prices seemed...
-
-
Loading…
-
Loading…
