Recent content by fireman0127

  1. fireman0127

    Left Turn Signal

    https://www.ramforum.com/threads/signal-lights.205031/post-2865876 See if this post helps :-) Good luck
  2. fireman0127

    Courtesy lights

    put your own momentary switch on the body side in between the hinges, they sell them at most auto parts stores. I know dorman makes some, just make sure it has enough, but not too much throw so when you close the door it doesn't get in the way and break or collapse into the hole you drilled to...
  3. fireman0127

    Which speakers to use for audio signal source for rear aftermarket subwoofer amp.

    Get a new deck with pre-outs and save yourself a bunch of time... I've tried to do what you are doing on my 95 Taurus SHO with a factory JBL system w/sub, back in the day... after at least 2 days of "lets see if this works" I just bought a new aftermarket deck and active crossover and sold the...
  4. fireman0127

    Signal lights

    This happened to me after I replaced the OEM headlights with aftermarket LED units that had a fancy DRL animated light show. The manufacturer or dealer that sold me the headlights told me about the CANBUS system (which I still know very little about), I bought amber turn signal bulbs that had a...
  5. fireman0127

    3.6 Pentastar Issues Thread

    I know this post is old but to all you DIYers who change your oil in the 3.6... Take the old cartridge filter and remove the ends from the paper element and it will open up like an accordion and make closer inspection for shiny metal particles that are trapped in filter paper. (I used a...
  6. fireman0127

    3.6 Pentastar Issues Thread

    2016 SLT 1500 3.6 85k miles, found metal shavings in oil filter, ticking noise started so I quit driving it. From all the research I've done in the last few weeks it is a fairly common problem on the pre-2019 pentastar V6 motors in Jeep, Ram, Chrysler, etc.. I'm just looking for the most cost...
Top