Recent content by Flyght_murse2

  1. Flyght_murse2

    SNOW PICS

    After driving to and from work today on 6 inches of new snow added to about 6 from a previous storm. second pic from yesterday.
  2. Flyght_murse2

    Alignment specs

    New alignment corrected all my issues. Trucks sits perfect, no more coil bow, and cam bolts are facing to the rear with no cross caster. Drives like a new truck.
  3. Flyght_murse2

    Alignment specs

    It has drops on the radius arms. Yeah it’s not looking good is it? I’m going to call my local 4x4 shop Monday morning. Can I adjust the caster in the driveway before then to see if it helps with the lean and bow? It is it something I should just wait and let them do? (They aligned it after my...
  4. Flyght_murse2

    Alignment specs

    I hate sounding like a total noob but those of you who have already replied I have another question. I noticed I have 1inch of lean on the front passenger side. When measured on a level surface it’s exactly 1inch lower than drivers side and is noticeable when looking at it from the front. I’ve...
  5. Flyght_murse2

    Alignment specs

    New drag link has been approved. Awaiting them to call back after talking to the dealership. Thanks @mtnrider for the heads up!
  6. Flyght_murse2

    Alignment specs

    Okay I just sent them a PM. Thank you for that. I’ll let you know what they say.
  7. Flyght_murse2

    Alignment specs

    9” wide wheel, they do stick out quite a bit. going to check everything this weekend to make sure nothing needs replaced. Was thinking of getting a new drag link anyway bc mine was one that was under recall and the nuts are welded on.
  8. Flyght_murse2

    Alignment specs

    No idea why it posted three pics of alignment, tried to edit and save only 1 but still there. Whoops.
  9. Flyght_murse2

    Alignment specs

    -12 offset. I figured with that much lift it would be difficult.
  10. Flyght_murse2

    Alignment specs

    Hey all, I have a 5inch RC lift with new coils on my ram 2500. This is my first heavy duty and previously only had leveling kits on other trucks. Just had new toyo open country RTs put on and an alignment. Truck seems to wander a little and if anything wants to pull right occasionally. I’ve also...
  11. Flyght_murse2

    Lifted 4th Gen Pics - Show Em Off!

    This is my first 3/4 ton with a big lift. It rides as I expected, rough as sh*t and loves the fuel. But I didn’t buy it for a smooth ride and gas mileage. I have only had it two weeks, but I would make the same purchase again. Nice! Safe travels and enjoy the holidays. I start a 6 night...
  12. Flyght_murse2

    AMP Research Running boards for lifted trucks

    Good choice with the AMP running boards. I have them on my 2500 with a 5 inch lift and 35’s. My wife can easily stand on them to strap our 8 month old in the car seat with no issues.
  13. Flyght_murse2

    Lifted 4th Gen Pics - Show Em Off!

    5” RC lift, 35x12.5x20 toyo open country RT’s (due for new rubber, contemplating what to get).
  14. Flyght_murse2

    Mirror turn signals only work when locking/unlocking truck

    Recently bought a 2017 2500 and the turn signals in the mirrors do not work. However, they do light up when locking and unlocking the truck. Any ideas why they wouldn't work when using the turn signal?
  15. Flyght_murse2

    Help identifying lift kit

    Th Thanks! That makes sense and that’s what’s happening.
See more

Latest posts

Members online

... and 10 more.
Total: 1,081 (members: 60, guests: 1,021)
Robots: 1,573

Forum statistics

Threads
195,439
Posts
2,870,291
Members
156,143
Latest member
BillMorehouse

Share this page

Top