Recent content by Hemi Hauler

  1. H

    Will a 4 inch Airlift P/N 52140 spacer work with firestone 2299 airbags?

    I'm wandering if anyone's run these two brands together. The firestone airbags 2299 and the 4 inch lift P/N 52140 spacer for lifted trucks. It says that it's a universal spacer for all air bags but we all know how that usually plays out. So any input would be great. Cheers
  2. H

    2004 Ram, 35" or 37" tires ?

    I have a 6" FabTech with 37's on my 2500 and I can rub when flexin. They do look great but for the price and the weight I'd go 35's. I don't think you have a problem clearing them unless you were full locked and flexin. For the added cost of 37's I'd put it into and a nice lift.... Maybe some...
  3. H

    Superchips Cortex Question

    I purchased it used from a friend locally yesterday. He also threw in his custom shift schedule from his 2008 1500. All I can say is WOW!! It's like a hole new truck. No more hunting for gears or lugging the motor. My biggest complaint with my dodge was the constant shift hunting for gears. Well...
  4. H

    Superchips Cortex Question

    Is a Superchips Cortex 3950 the same as a superchips 3865? Am I going to get transmission tunning with this? What are the differences other than a warranty?
  5. H

    Almost lift time

    I have a 6" FabTech lift on my 2500. I like it a lot. I'd go for the Bilstein shocks for the ride quality. As for BDS, it's a great lift with good quality parts. As for zone they are garbage. Everything about the lift is garbage. There's a good old saying "you get what you pay for".
  6. H

    Lucas Oil Synthetic Oil Stabilizer

    My 07 has a slight tick at start up around -25*C. I was thinking about switching to a full synthetic but I'm worried after the last time I did that. I had a 09 Chevy Silverado 1500 and thought I'd switch it over to a full synthetic "Mobil 1" and within the first week she'd drank just over a...
  7. H

    anyone with pix of their lifts

    There 37" tires and I would agree about an inch taller than a 1500. At full flex I rub. If I had to do it all again I'd go with a 4" lift and 33" tires especially with a 1500. What gears do you have? I think 35" are a bit big for a 4" lift unless you went with 4.5-5.0 back spacing with an offset...
  8. H

    anyone with pix of their lifts

    I have a 6" FabTech on a 07 2500
  9. H

    Brake and ABS warning lights

    Great! Now you got me thinking about my ABS lights. What are my axels on a 07 2500? I scanned my truck and it came up erratic rear speed/wheel sensor. Replaced the sensor and cleared it and it was back on with in minutes. I haven't had this truck long but I have heard a howl that I haven't...
  10. H

    Lifted 3rd Gen Pics - Show Em Off!

  11. H

    Life with a Dodge

  12. H

    Retro Solution Digital 6000K HID's Installed!!

    Did you loose your DRL's or are your high beams on at start up? I thought a bi-xenon kit was when the bulb actually moved to produce your high and low beam like the new jeep wranglers? Anyways they look great!
  13. H

    Best 6" lift

    I've had Trail master, two Pro-comps and I have a FabTech in the Dodge. FabTech is probably my favourite out of all of them. But I think if I was doing it over I'd go with a BDS. All my lifts were good quality but what really counts is how it goes in, how it sits empty/loaded and how it rides...
  14. H

    What programmer or tunner should I go with???

    So to get a custom tune I buy a diablo tunner and then send it out to have a custom tune stored on it? So by doing that I have all the options the programmer has to offer + a custom tune? So what does that cost? How much of a gain are we talking? How long does all this take? What are something's...
  15. H

    What programmer or tunner should I go with???

    Are those the two best for my year?
See more

Latest posts

Members online

... and 30 more.
Total: 1,391 (members: 80, guests: 1,311)
Robots: 1,876

Forum statistics

Threads
195,596
Posts
2,872,323
Members
156,401
Latest member
jesmich

Share this page

Top