Recent content by HTX

  1. H

    3" Rough Country lift installed.

    The first photos were the factory Goodyear tires. The AT tires are 35x12.5
  2. H

    3" Rough Country lift installed.

    The lift kit is only $500 on Rough Country 's website. If you pay a shop to install it you can expect around 4 to 5 hours of labor charged to you.
  3. H

    3" Rough Country lift installed.

    There's two spacers. One inside the strut assembly, on top of the shock, and another on top of the assembly. Most leveling spacer kits that I have seen use only spacers on top of the assembly. I didn't measure the sizes of the two spacers. As far as comparing this to bilsteins set at...
  4. H

    Rough Country Mess Grille

    The grill is a fairly new product just came out about a month or so ago. It'll be hard to find someone who already has one that will review it for you. Just because you can make a cheaper alternative does not mean that $400 is not a great deal for this Grill. Most grills are in the 300 (no...
  5. H

    anyone ok with 2 inch spacers?

    When I called around, every single shop in my area uses simple $100 spacers to level unless the bils we're specifically requested. Im not an expert myself, I was just surprised that many of them felt that the Bils were unnecessary unless the ride quality was a concern. They stated that spacers...
  6. H

    rough countries 3" suspension lift

    Unfortunately, I didn't take photos of install. You do have to follow the steps as if you were replacing the shock, meaning that you will need a spring compressor. I borrowed one from AutoZone for free. I will say that it was pretty easy. A friend and I knocked it out in about 4.5 hours...
  7. H

    rough countries 3" suspension lift

    There is a spacer within the strut assembly as well as on top of the assembly; 2 spacers on each side of the front. The ride is same as stock, and nothing is overextended.
  8. H

    rough countries 3" suspension lift

    The link I posted takes you to my thread. There's pictures there.
  9. H

    LED canbus license plate lights

    I use JDMAstar bulbs. Work great in license plate but have lots of issues with the exact same bulb in my interior (they sometimes won't turn on).
  10. H

    LED signals and tails installed

    Looks good, and thanks for the review. I did Astar's myself, but required two resistors per bulb. I still haven't found a decent interior brand for our canbus systems yet.
  11. H

    1" too high leveling kit

    Whoa, you gained over 3.5"? Odd... Did you put new shocks on as well? Did you do your own install? As stated above, drive around a bit and let the components settle.
  12. H

    Lifting my truck for Moab - how much with the least power sacrifice?

    I have the RC 3" lift. I was able to fit 35" Terra Grapplers under the truck as well. Its only $500 and installed in 4 hours. No cutting, drilling, or any of that. My axel ground clearance increased by an inch, my front bumper increased by 4.5 rear bumper 1.75, and the center-high by 3...
  13. H

    rough countries 3" suspension lift

    I've got it. http://www.ramforum.com/f40/3_rough_country_lift_installed-107805/
  14. H

    Lifted with stock wheels.... post em here!!!

    Baby lift (RC 3"). Factory wheels. No spacers. 35's
  15. H

    Can you guys post some pictures?

    The differences in those two sizes is less than half an inch. How significant is this cost difference? Are we talking a $20 difference or a $400 difference? Is half an inch really worth it?
See more

Latest posts

Staff online

Members online

Total: 1,078 (members: 47, guests: 1,031)
Robots: 1,733

Forum statistics

Threads
195,465
Posts
2,870,571
Members
156,174
Latest member
Madmav79

Share this page

Top