-
-
hunterdan replied to the thread Did you install decoders on low beam/ high beam and fog lights for LED Bulbs?.I've changed all settings to led/hid and don't use any adapters, decoders, or resistors. -
hunterdan replied to the thread Alpha Rex issue - need turn signal bulb socket.It should be the same socket, it's just a 3157 bulb. The difference is probably in the fact that the older trucks probably had dual...
-
hunterdan replied to the thread Go Rhino hitch step.I got this one, added a locking pin. I might drill out the holes and add a tighter bushing to eliminate some of the slop. But, it's a...
-
-
hunterdan replied to the thread Need assistance with replacing headlamp assembly.I would too, but it'd require buying 2 sets of projectors.
-
hunterdan replied to the thread Need assistance with replacing headlamp assembly.For me, it comes down to being able to see beyond. The width is great, but the distance lacked, even when aimed up. It's just...
-
hunterdan replied to the thread Need assistance with replacing headlamp assembly.Even the higher end projector retrofits are the same way. They all have the step. It's either sloped or stepped, but there's always a...
-
hunterdan replied to the thread rear turn signal wiring question.What kind of light bar did you get? Needing a constant 12v from the turn signal isn't going to happen.
-
hunterdan replied to the thread Upgrading Fog Lights - looking for suggestions.The ss3's are a great setup. They are solid, and work great.
-
hunterdan replied to the thread Oedro projector headlights..Can't comment on their projectors. I did buy a set of their reflector housings with drl strips to try. The housings came in, looked...
-
hunterdan replied to the thread Acanii headlight issues.When messing with my turns and drl options it took hours for them to reset. No idea why, but it took a while.
-
hunterdan replied to the thread Acanii headlight issues.How long are you waiting before testing the changes?
-
hunterdan replied to the thread Auxito 80w led bulb review.Fogs should be the same orientation as the headlights. Otherwise the light will be projected out and up instead of wide and low.
-
hunterdan replied to the thread Acanii headlight issues.Do you have the drl dropout enabled? Is your drl powered off a fuse tap?
-
hunterdan replied to the thread Acanii headlight issues.Try it. When I made the adjustments for drls and turns on my truck I had to let it sit for an hour or 2 for them to finally take and...
-
hunterdan replied to the thread Acanii headlight issues.Set your drl to turn signals. When I made changes to the drl function, I'd have to let the truck sit for an hour or 2 before the...
-
-
Loading…
-
Loading…
Members online
- McNoFinger
- stevenram
- cummins60
- Canadian-Hemi
- NJMOPAR
- Pauls Ram
- Gordo2212
- leadedgas
- mb33458
- Mitchel813
- HEMIMANN
- Armyman247
- dhay13
- MN2500
- DJ18hemi1500
- nickheaps819
- AZ Heat
- I L Weaver
- TOTALCHAOS69
- Marshall
- ramffml
- Cchurchi
- msplctxn
- BigWilly
- Vaanth
- Erikk
- getrdun
- Smokeybear01
- bucktruck
- Rob2gen
- jws123
- Joe1925
- Calvingreerjr
- healthyrx
- Wycheguy
- B3N01ST
- KalboKalbs
- txlaramie
- Huntzmax
- BWL
- Rufus66
- Thendrix
- tjfdesmo
- dkelly3103
- Desert Dawg
- Goofyshit
- Hinrisen1
- Scots
- DURASPANK
- Hcamper