Recent content by hunterdan

  1. hunterdan

    Rear coil question on 2021 1500 Classic Warlock

    You're adding weight to the driver side with the bigger fuel tank. You're offsetting that weight with a slightly stiffer spring. I've had both trucks. An outdoorsman and a big horn. My big horn with 1.5" rear spacers and 2" front struts is significantly taller than my outdoorsman, all the way...
  2. hunterdan

    Rear coil question on 2021 1500 Classic Warlock

    Here are part numbers comparing the rear springs from a 2016 outdoorsman (my old truck) to my current big horn. You'll notice that the outdoorsman and bighorn share a common rear coil. Big horn driver side is used on outdoorsman passenger side. Outdoorsman gets slightly heavier spring on driver...
  3. hunterdan

    Rear coil question on 2021 1500 Classic Warlock

    The warlock sits the same height as other trucks in the rear, the only difference in ride height is in the front. Ram has a bunch of part numbers for rear springs depending on cab configuration, fuel tank size, payload, etc, but they should be about the same height.
  4. hunterdan

    Bought used tires with tpms...not working

    I believe 2013 uses the older sensor, so you'd have to physically change the sensor out. 2014+ is the newer style.
  5. hunterdan

    Motorola MA1 wireless android auto adapter

    It's been several months since I installed this and did the power wire switch. So far, zero issues. Connectivity is still just as quick as day one. It's dropped out maybe once or twice since and that's a maybe. I don't really recall having any major issues. I highly recommend so far if you're...
  6. hunterdan

    Running board mounting problem

    The front ones might be used in the manufacturing process to hold the cab or something. But there are kits out there that include the rivnuts and "installation tool". If you get a set of steps, be sure to get a set that attach to both the rocker and the pinch weld. Otherwise, you're looking...
  7. hunterdan

    DRL’s

    There are options. You can select no drl if you wanted. But parking lights are not an option unfortunately.
  8. hunterdan

    DRL’s

    If the truck didn't have dedicated drls, the connector under the fuse box should have the wiring on one side. It's just a matter of running the leads into the other side of the connector and enabling them via alfaobd.
  9. hunterdan

    DRL’s

    In order for the drl to be white, you need a dedicated power wire (either from a key on power source or from the OEM drl wiring). If you set the drl to turn signal, the drl amber during the day, but should light up white at night, as the amber portion is the turn signal. When the low beams are...
  10. hunterdan

    Anyone add a LED light bar in grill or aftermarket grill with light bar?

    I went with a set of 5" round lights. I had already removed the AGS and I had to removed the deflectors from the grille shell to get them to fit right. But they are mounted in a set of factory tapped holes.
  11. hunterdan

    NHTSA Opening Probe for Steering Issues

    I It likely had water inside or one of the solder joints is failing. Expect it to go out again. In the mean time, report the issue to nhtsa. The more people who report the issue, the better the chance of getting either an extended warranty on these, reimbursed for out of pocket expenses, or...
  12. hunterdan

    2017 1500 More lighting and electrical issues

    The harness install is pretty easy, it's just a matter of pulling the blank plugs out of the connector and putting it all back together. There's a thread on it here as well, I wish I would have documented it when I did it, but it's not bad. Should be less than an hour to pull the top of the...
  13. hunterdan

    2017 1500 More lighting and electrical issues

    I'd enable hid (high intensity discharge) lights via alfaobd to eliminate the pwm so you don't get any possible flickering of the headlights for starters. After that, as long as you enable led settings for every light, front and rear, you should be able to eliminate any and all resistors. In...
  14. hunterdan

    What did you do with your 4th Gen this week?

    Finally got time and decent enough weather to install my switch panel and ditch lights. I had previously installed the grille lights, but hated the way I had wired it up. The panel lets me add more circuits if needed.
  15. hunterdan

    Form Lighting Headlights

    The headlights adjust the same way stock did, except you use a #2 Philips screwdriver. It meshes with the gears. The lights can also be adjusted left/right, but the adjustment is harder to get to.
See more

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,405 (members: 57, guests: 1,348)
Robots: 1,837

Forum statistics

Threads
195,613
Posts
2,872,541
Members
156,433
Latest member
cowboy2

Share this page

Top