I'm also seeing 60 degree numbers cold and low 50's hot idle. Engine temps are normally 185 coolant and 195-205 engine oil. This is on a stock pump and engine running Amsoil 5w-30
thermostats are hit and miss. I am running a 180 that opens up fully at 187. I replaced it with a brand new on that didn't fully open up till 193. I can tell by watching coolant temps drop when driving on a cold engine. The coolant temps will creep up till the thermostat fully opens then the...
I have a Pioneer 7600nex coming and I know I will need the maestro. However the Ram kit 1 is out of stock everywhere and it has the t harness to connect the maestro to the factory harness. Is the t harness the same for the challenger/charger/jeep of the same year? I don't need the dash kit just...
got any pics of the finished install? I'm looking to do the same with one of their 9" screens if I can find one. How do you like it and integration "features" that you don't like?
Swapped mine out about 2 months ago on my 17 with 90K. Could not figure out where a ticking was in the front of the engine. Changed out several pullies and nothing. Changed the water pump and the bearings were shot.
oem fob or aftermarket. When I added push button start to my '17 I needed new fobs. I got one oem and one guaranteed to work aftermarket. Oem works flawless. Aftermarket works 95% of the time. locking unlocking doors starting truck etc.
I might go that route. I did a ceramic on mine a couple of years ago and it's held up ok. I still will throw a coat of cermic wax on it from time to time so I think that added to its health. my problem is I like to detail and there are very few products I've found that do the black justice. I...
How much of an application pain was it? Have you used any of their other products? I am a junkie when it comes to car cleaning products always looking for the next thing. I've done the ceramic. Not overly impressed with the longevity. I park outside a chemical plant so I know mine gets hit...
Gone, I did then about half way through 2-3 between 1500-2000rpms I would get it all back and then some. Felt like the throttle was sticking or in a bind then all of a sudden let loose. I put my original unported one back on and everything went back to acting like before except much better...
So I threw my original unported throttle body back on yesterday and all of the issues I was having disappeared. So new question. The original throttle body is an AB(last 2 of the part number) the ported one is an AC version. I am now wondering if the electronic side of the ported TB has an...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.