jelih's latest activity
-
my BIL 3D printed me a hitch receiver cover that looks like an AR15 bolt -
$10.00. :33:
-
jelih replied to the thread Block coolant flush after cam.I saw about those in an earlier thread, and found both of them. The passenger side is accessible, but idk if I can get the driver side...
-
There's a block drain on both sides of the engine,wouldn't hurt to pull them if you can, to help flush out the block
-
jelih replied to the thread Block coolant flush after cam.If the pan is on, along with the timing cover, I don't think any of it can get into the pan. It's be like if you just went outside and...
-
I'm putting everything back together after a cam and lifters swap. When I was cleaning the top of the block and pistons, a bunch or...
-
-
Electromotive cleaner for alt/starters. Mass air cleaner for throttle body. It has a coating on it. Brakekleen can ruin electrical...
-
Get a big tub from home depot, get jug of cleaner (ZEP or something that won't harm plastic etc) put hot water and dillute cleaner. Dump...
-
jelih replied to the thread Take intake manifold to the carwash?.So I said that the lifters and cam looked new, and they do, but what are the chances that a lifter collapsed? And what does that even...
-
-
jelih replied to the thread Take intake manifold to the carwash?.Shyt. I didn't soak it, but it did liberally spritz it. What's done is done I guess.
-
jelih replied to the thread Dimples around intake valve?.I'm cleaning my heads right now and mine are staked on all the valves and my first thought, not being a mechanic, was "what is this...
-
I'm guessing you read Dilligafs post,lol. The only way to push the seal out re-installing the cover,is if you're not paying attention to...
-
jelih replied to the thread How-To: 4th gen hemi cam installation.I'm in the middle of doing this job over several weekends. One thing I've noticed in all the threads I've read and all the videos I've...
-
If moneys a bit tight,i'd reuse the stock pump,as the melling pump you have is basically a stock pump with a stiffer bypass spring. If...
-
jelih replied to the thread Take intake manifold to the carwash?.Perfect. Thank you.
Staff online
-
mikeruSuper Moderator
Members online
- Rkruzeski
- ILLXJ
- indept
- mikeru
- Dodge 1500 4X4
- eclark88
- Jbg3
- rewd1
- La Ramie
- Neilr5515
- minotto
- skates15
- HAWKWARLOCK
- Thendrix
- RJL1
- HEMIMANN
- Travis8352
- RedRam10
- thtsaustin
- WY-Dave
- Edward Hands
- BucketGruntJL
- DustyGeneral9399
- Wild one
- Bmags
- 4thgenerationdodg
- olyelr
- Atcer2018
- mdc1990zr1
- PDub72
- Fritter
- Stefan N
- AZ MARK
- marine0311
- Maniac
- Lsujker
- mb33458
- ajv00303
- Black-Wolf
- clifford15
- brendan185
- 6speed4.7
- TNGA
- Pittbullsean
- Dean2
- northlane1