Recent content by k_gomez17

  1. k_gomez17

    Truck Shaking While Braking

    Well, I just got my truck put back together. I definitely did need rear brakes and rotors. That seems to have fixed the pulsating pedal and the major shaking. However I think that was a separate issue from my original problem which started before I replaced my front brakes and rotors. My truck...
  2. k_gomez17

    Truck Shaking While Braking

    I’ll have to swap the rear rotors out too now that I know that. I’ve never kept a vehicle long enough to have to replace rear rotors before so that didn’t even cross my mind to check lol hopefully it’s not a wheel bearing. That sounds like more of a pain than just rear rotors. I’m stuck at work...
  3. k_gomez17

    Truck Shaking While Braking

    I only replaced the fronts. I also was due for new tires so I got those and an alignment about 1k miles ago. I was not told my tie rods or anything need to be replaced. I’ll jack it up tomorrow and double check. The tech doing my alignment did seem lazy and careless.
  4. k_gomez17

    Truck Shaking While Braking

    Hey guys, I drive a 2018 1500 Ecodiesel with 76k miles. Around 70k I started noticing the truck slightly shaking when slowing down, I assumed it was rotors so I replaced brakes and rotors. It did not help, since then it has gotten worse, originally only did it while slowing from 10 mph now it...
  5. k_gomez17

    How To: Add Factory Keyless Enter N Go

    I have a 2018 ecodiesel and I have wait to start off on mine. To my understanding from the guys on here, wait to start only needs to be on for the 3/4 ton and up diesel trucks not the ecodiesel. If yours is a 19 classic with the hemi, it should definitely be off. I didn’t have any issues with...
  6. k_gomez17

    How To: Add Factory Keyless Enter N Go

    I bought one Amazon fob and one factory Mopar for when I did mine. The Amazon does work fine for me but the Mopar seems way more consistent. The big thing I noticed is the range on the fob for lock/unlock and remote start. The Amazon fob I had to be probably 15-20 feet away from the truck for it...
  7. k_gomez17

    How To: Add Factory Keyless Enter N Go

    I don’t remember how long it took on the first fob. This time around once I entered my pin and started the process, it took maybe 30 seconds.
  8. k_gomez17

    How To: Add Factory Keyless Enter N Go

    I finally bought a second fob (figured I should have a spare) when I program the second fob, so I have to do rf hub reset? And will the truck die and all that like the op says? Or was that just because of adding the new hub and programming the key simultaneously?
  9. k_gomez17

    How To: Add Factory Keyless Enter N Go

    The picture is the view of it going to the module
  10. k_gomez17

    How To: Add Factory Keyless Enter N Go

    It looks like that does have a separate remote start antenna that is mounted underneath the headliner.
  11. k_gomez17

    How To: Add Factory Keyless Enter N Go

    If I understand right, depending on your factory options your remote start antenna should be on the rear cab wall next to the rf hub unless it has the antenna built in to the the hub. You should be able to tell by looking up your rf hub pn on Alfa, or you can pull your back seat and see if it’s...
  12. k_gomez17

    AlfaOBD

    Gotcha... so with that do I turn off the wait to start? If it’s all set up on does all the warming and everything on its own? I did notice the delay when I have wait to start on but not with it off. I just don’t want to have a setting off or on that could damage the truck in some way
  13. k_gomez17

    AlfaOBD

    Hopefully someone can help... I added keyless enter n’ go to my 2018 ecodiesel and everything works but the remote start. I do have factory remote start. When I have “vehicle configuration 5 wait to start” set remote start does not work. However when I turn it off it does work. Problem is...
  14. k_gomez17

    AlfaOBD

    Does anyone by chance have original BCM settings for an ecodiesel with factory enter n’ go and factory remote start they’re willing to post?
  15. k_gomez17

    How To: Add Factory Keyless Enter N Go

    I’ll give that a shot. I drove around quite a bit then tried remote start with it on when it didn’t work. After I turned it off I waited maybe 5 minutes and remote start worked. I’ll play with it both ways to make sure it’s not a coincidence Update: After driving around for a while now and what...
See more

Latest posts

Staff online

Members online

... and 13 more.
Total: 1,231 (members: 63, guests: 1,168)
Robots: 1,292

Forum statistics

Threads
195,396
Posts
2,869,711
Members
156,062
Latest member
tffbrutus

Share this page

Top